Bedienungsanleitung JVC HR-V520 (Seite 9 von 16) (Englisch)

57355

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

9 EN

Basic Operation

Playback

Tracking Adjustment

• Tracking adjustment will be activated automatically

(Digital Tracking function) when you start playback.

• When playing pre-recorded tapes or tapes recorded on units

other than your own, noise lines (black and white streaks)

may appear on the playback picture. If this occurs, you can

adjust the tracking control manually by pressing

PR (+/-) until the streaks disappear. To return to the DTR

function, stop the tape once and start playback again.

• You can reduce the noise lines by pressing

PR (+/-)

in Slow

mode, too. Slow tracking adjustment is not set

automatically.

• In the Still mode, press SLOW, and press PR (+/-) until the

streaks disappear. To return to the Still mode, press

F (PAUSE/STILL) again.

1) Turn on the TV and select the video channel on the TV.

2) Insert a prerecorded tape.

The VCR will turn on automatically. If the erase-

protection tab has been removed, the VCR will start

playback automatically.

3) Press

PLAY B / K to begin playback.

•Tracking adjustment will be activated automatically

(Digital Tracking function) when you start playback. To

adjust the tracking manually, press

PR (+/-).

•Using the buttons on the VCR

Just press

PLAY B on the VCR. Power will

automatically turn on and playback will start. (Direct

Button Operation)

•Using the buttons on the remote control

Press /I (STANDBY-ON) to turn on, and then press

PLAY B / K.

4) Press

STOP C / L to stop playback.

Speed Search

1) Press F.FWD g / B or REW h /{ during playback to

view a videotape at a high speed in either a forward or

reverse direction. In this mode, the sound will be muted.

2) Press the button again, the VCR will now search in super

high speed. (This function will not operate for a NTSC

tape.)

3) Press

PLAY B / K to return to normal playback.

Still Picture

Press F (PAUSE/STILL) during playback to view a still picture

on the TV screen.

• When the picture begins to vibrate vertically, stabilize the

picture by pressing

PR (+/-) in the Still mode.

• After the VCR has been in Still mode for 5 minutes, it will

stop automatically to protect the tape and the video head.

• Usually there will be video “noise” lines (black and white

streaks or dots) on the screen. This is normal.

The still picture will, in addition to containing the “noise”

lines, be black and white.

This is not a fault of the machine but merely a by-product

of the technology involved in producing a VCR with

LP mode.

Slow Motion

•Press SLOW to reduce the playback speed. The VCR mutes

the sound during slow motion. You can control the speed

by pressing F. FWD g / B (faster) or REW h /{ (slower).

Press

PLAY B / K to return to normal playback.

• If it is left in the Slow mode for more than five minutes, the

VCR will automatically switch to the Stop mode.

Recording

Viewing and Recording the Same Programme

1) Insert a cassette tape with its erase-prevention tab in place.

(If necessary, rewind or fast forward the tape to the point

at which you want to begin recording.)

2) Press

the Number buttons or PR (+/-) to select the channel

to be recorded.

3) Press SYSTEM SP/LP (SPEED) to select the tape speed

(SP/LP).

4) Press

REC I to begin recording.

•The REC indicator on the display comes on.

5) Press

STOP C / L when recording is completed.

Skipping Unwanted Programme Material During

Recording

1) Press F (PAUSE/STILL) when you want to temporarily

halt recording.

You can check the remaining pause time with

marks on

the TV screen. Each

mark represents 1 minute. After 5

minutes, the VCR will automatically switch to the Stop

mode to prevent tape damage.

2) Press

F (PAUSE/STILL) or REC I to resume recording.

Recording One Programme While Viewing Another

You can record one programme while viewing another. To

start recording, follow steps

1) to 4) under “Viewing and

Recording the Same Programme”. Then, set the TV to the

channel you want to watch.

To Monitor the Progress of Your Recording

Select the video channel on the TV.

Assemble Function

• You can record in continuation from previous programme

on a pre-recorded tape.

1) Insert a pre-recorded tape. Press

PLAY B / K to start

playback.

2) Press

F (PAUSE/STILL) at the desired point on the tape.

3) Press

REC I. The VCR will be in the Recording Pause

mode.

4) Press

PR (+/-) to select the channel to be recorded.

5) Press

REC I or F (PAUSE/STILL). The recording will

begin.

6) Press

STOP C / L when recording is completed.

Hi-Fi Stereo Sound System

This VCR will record and playback Hi-Fi stereo sound. In

addition it has a A2 and NICAM stereo sound decoder.

This equipment will receive stereo and bilingual broadcasts

and it is possible the several ways of recording and playing back

the sound.

Selecting the Sound Mode

You can select each mode by pressing AUDIO on the remote

control. Each mode is indicated on the TV screen as following.

HM4N0ED(EN).fm Page 9 Friday, January 13, 2006 5:39 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-V520 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC HR-V520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info