Bedienungsanleitung JVC HR-VP48U (Seite 18 von 48) (Englisch)

454021

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

BASIC PLAYBACK AND RECORDING (cont.)

Locating beginning of

recordings — Index Search

Index codes are placed on the tape at the beginning of

each recording when recording on this VCR. You can

find and automatically play back from the beginning of

any recording using the Index Search function.

1 Start search

While the tape is not running, press SHUTTLE PLUS

4 or ¢ on the Remote.

2 Access distant code

To access a recording of 2 to 9 index codes away,

press SHUTTLE PLUS 4 or ¢ repeatedly until

the correct number is displayed on screen (only if

“SUPERIMPOSE” is set to “ON” ; ੬ pg. 33).

Playback begins automatically when the desired

recording is located.

● If you want to find the very beginning of the

desired program, press REW ( 1 ) or FF ( ¡ )

after playback starts.

NOTE:

An index code is not placed on the tape when recording is

resumed from recording pause.

Locating beginning of timer

recordings — Instant Review

At the press of a button, you can turn on the VCR,

rewind the tape and begin to view the most recent timer-

recorded program.

Press REVIEW on the Remote after ensuring that the

VCR is in the timer recording standby mode.

● The VCR turns on, and rewinds to the index code

indicating the beginning of the last timer-recorded

program, then begins playback automatically.

● You can access a program of 2 to 9 index codes away

from the current position on the tape. If, for example,

you have 5 programs recorded and you want to watch

the third one, press REVIEW three times.

● If you want to find the very beginning of the desired program,

press REW ( 1 ) or FF ( ¡ ) after playback starts.

● If the tape is already rewound when REVIEW is

pressed, it will play the tape from the beginning. It will

not fast-forward to an index code.

● The Instant Review function will also operate if the

VCR is turned on.

Other Useful functions for playback

You can also use the following functions for recording.

● Auto Picture (੬ pg. 33)

When this function is set to “ON”, this VCR checks the

condition of the tape in use during playback, and

compensates to provide the highest-possible playback

pictures.

● Picture Control (੬ pg. 33)

This function helps you to adjust the playback picture

quality according to your preference.

● Video Stabilizer (੬ pg. 34)

You can automatically correct vertical vibrations in the

picture when playing back unstable recordings made on

another VCR.

● Blue Back (੬ pg. 34)

When this function is set to “ON”, the TV screen becomes

all blue in the following cases:

– When receiving a channel not in use.

– When stopping playback.

Current position

on the tape

Beginning of the current

program recorded

Beginning of the 2nd next

program recorded

–1

–2

program

recorded

program

recorded

2nd next

2 3

4 5 6

FF ( ¡ )

REW ( 1 )

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-VP48U Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info