Bedienungsanleitung JVC HR-VP78U (Seite 45 von 64) (Englisch)

7356

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

EN 45

Enable remote pause function

On the front panel:

Press CH 5∞ to move

the highlight bar (arrow)

to “AV COMPU-LINK”,

then press OK to set it to

“OFF”.

On the Remote:

Press SHUTTLE PLUS

%ﬁ to move the

highlight bar (arrow) to

“AV COMPU-LINK”,

then press OK or

SHUTTLE PLUS

to set

it to “OFF”.

● The REMOTE PAUSE/

AV COMPU-LINK

connector works as the AV Compulink

connector when “AV COMPU-LINK” is set to

“ON” ( ੬ pg. 38 and 41), and works as the

Remote Pause connector when “AV COMPU-

LINK” is set to “OFF”.

Return to normal screen

Press MENU.

Start playback

Press PLAY ( 3 ) on the camcorder.

NOTE:

If the camcorder is equipped with a superimpose/OSD

disable feature then set it to “OFF” before starting

playback.

Start recording

On the front panel:

Press REC ( ¶ ).

On the Remote:

Press REC ( ¶ ) and PLAY ( 3 ) at the same time.

● If you are using a Master Edit Control-equipped

JVC camcorder, recording starts automatically

on this VCR. (Refer to camcorder’s instruction

manual.)

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or

“NORM” when “VIDEO CALIBRATION” is set to “OFF”) after

you finish dubbing the tapes (

੬

pg. 38 and 39).

BLUE BACK ON

2ND AUDIO RECORD OFF

AUDIO MONITOR HI-FI

AV COMPU-LINK OFF

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

FUNCTION

VIDEO CALIBRATION ON

PICTURE CONTROL AUTO

AUTO TIMER OFF

SUPERIMPOSE ON

AUTO SP

=EP TIMER OFF

VIDEO STABILIZER OFF

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

You can use a camcorder as the playback VCR and your

VCR as the recording VCR

Make connections

Connect an audio/video cable between the

camcorder’s audio/video output connectors and

your VCR’s video audio/video input connectors.

● When the JVC camcorder is equipped with the

Master Edit Control, you can control the VCR

from the camcorder. Connect the mini-plug

cable (not supplied with this VCR) as illustrated

to the left.

● When using a camcorder with a monaural

output, connect the audio output connector on

the camcorder to the left audio input connector

on this VCR.

Load a cassette

Insert the cassette to be recorded on into this

VCR (for recording).

Select input mode on this VCR

Select “L-1” — when connecting the camcorder

to the audio/video input

connectors on the rear panel.

Select “F-1” — when connecting the camcorder

to the audio/video input

connectors on the front panel.

On the front panel:

Press CH 5∞.

On the Remote:

Press the Number key "0 (AUX)" or CH +/–.

Access Main Menu screen on this VCR

Press MENU.

Access Function Set screen

On the front panel:

Press CH 5∞ to move the highlight bar (arrow) to

“FUNCTION SET”, then press OK.

On the Remote:

Press SHUTTLE PLUS %ﬁ to move the highlight

bar (arrow) to “FUNCTION SET”, then press OK

or SHUTTLE PLUS

Select “EDIT” for Picture Control

Follow the procedure described on pages 38 and

39.

If your camcorder is a JVC Master Edit Control-

equipped type — go to step .

If your camcorder is NOT a JVC Master Edit

Control-equipped type — go to step .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-VP78U Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info