Bedienungsanleitung JVC hr xv48ex (Seite 19 von 72) (Deutsch, Englisch)

138393

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Masterpage:Right-No-Heading

Filename [XV48EK_07S-VHS.fm]

Page 19 November 18, 2004 10:44 pm

Playback Features

Still Picture/Frame-By-Frame

Playback

1 Pause during playback.

Press 9.

● If there is vertical jitter, press PR +/– on the remote control to

correct the picture.

2 Activate frame-by-frame playback.

Press 9.

Slow Motion

While playback is paused, press and hold 9 for 2

seconds, then release. Press 9 and release again to return

to still picture.

NOTE:

During slow motion playback, some noise may appear on the TV

screen. Press PR + or – on the remote control to eliminate the

noises.

Variable Speed Search

During playback, press 5 for forward variable speed

search, or 3 for reverse variable speed search.

● The speed changes for each direction by pressing 3 and

5 repeatedly.

When pressing 5: +5x{+7x

When pressing 3: –1x]–5x{–7x

(Once 3 is pressed, reverse search starts in –1x normal

playback speed. After this process, each press of 3 changes

the search speed between –5x and –7x.)

NOTE:

The search speed changes in the same way for SP and LP mode.

Skip Search

During playback, press 1 to 6 times to skip over

unwanted sections.

Each press initiates a 30-second period of fast-motion

playback. Normal playback resumes automatically.

Index Search

Your unit automatically marks index codes at the beginning of

each recording. This function gives you quick access to any one

of 9 index codes in either direction.

NOTE:

Before starting, make sure the unit is in the Stop mode.

Activate Index Search.

Press 2 or 6. “2 1” or “6 1” is displayed on

the TV screen and search begins in the corresponding

direction.

● To access index codes 2

through 9, press 2 or

6 repeatedly until the

correct index number is

displayed.

Example:

To locate the beginning of B

from the current position,

press 2 twice.

To locate the beginning of D from the current position, press

6 once.

● When the specified index code is located, playback begins

automatically.

Next Function Memory

The Next Function Memory “tells” the unit what to do after

rewinding. Before continuing, make sure the unit is in the Stop

mode.

a- For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds.

b- For Automatic Power Off

Press 3, then press 1 within 2 seconds.

c- For Automatic Timer Standby

Press 3, then press # within 2 seconds.

d- For Automatic Cassette Ejection After Tape Rewind

Press 3, then press x within 2 seconds.

One Touch Replay

Press during playback.

Pressing once moves the playback position back to about 7

seconds before the current position. You can press

up to 4

times each One Touch Replay.

● Turn on the TV and select the video channel (or AV

mode).

● Slide the TV/VCR/DVD switch on the remote

control to the right.

ATTENTION

In the search, still, slow-motion or frame-by-frame playback

mode,

● the picture will be distorted.

● the noise bars will appear.

● there may be a loss of colour.

● you cannot hear the sound.

To resume normal playback, press 4.

To resume normal playback during a Skip Search,

press 4.

Current position

Index number

XV48EK_01.book Page 19 Thursday, November 18, 2004 10:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC hr xv48ex Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info