Bedienungsanleitung JVC hr xv48ex (Seite 23 von 72) (Deutsch, Englisch)

138393

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Masterpage:Right-No-Heading

Filename [XV48EK_07S-VHS.fm]

Page 23 November 18, 2004 10:44 pm

Receiving Stereo and Bilingual

Programmes

Your unit is equipped with a Digital stereo sound decoder

(NICAM) making reception of stereo and bilingual broadcasts

possible.

When the channel is changed, the type of broadcast being

received will be displayed on the TV screen for a few seconds.

● To listen to a stereo programme, press A.MONITOR until

“HIFI L jhR” appears on the TV screen.

● To listen to a bilingual programme, press A.MONITOR until

“HIFI L j” or “HIFI h R” appears on the TV screen.

● To listen to the standard (Regular Monaural) audio while

receiving a NICAM broadcast, press A.MONITOR until

“NORM” appears on the TV screen.

NOTE:

“O.S.D.” must be set to “ON,” or the on-screen displays will not

appear. (

੬ pg. 53)

To Record NICAM Stereo and Bilingual Programmes

The NICAM audio programme will be recorded on the Hi-Fi

audio track, and the standard audio programme will be recorded

on the normal audio track.

NOTES:

● If the quality of stereo sound being received is poor, the

broadcast will be received in monaural with better quality.

● Before playing back a programme recorded in stereo, or a

bilingual programme, refer to “Soundtrack Selection” on

page 20.

B.E.S.T. Picture System

The B.E.S.T. (Biconditional Equalised Signal Tracking)

system checks the condition of the tape in use during

playback and recording, and compensates to provide the

highest-possible playback and recording pictures. You

can set “B.E.S.T.” to “ON” or “OFF” to your preference.

(

੬ pg. 53)

Playback

The unit assesses the quality of the tape once you initiate

playback.

● The unit adjusts the playback picture quality based on the

quality of the tape in use.

● B.E.S.T. is active during automatic tracking. “bESt” appears

blinking on the front display panel.

● “bESt” only appears at the beginning of automatic tracking.

Even though it doesn’t appear after that, the B.E.S.T. function is

operative.

Recording

The unit assesses the quality of the tape once you initiate

recording.

● The unit spends approximately 7 seconds assessing the

condition of the tape, then begins recording.

Type of broadcast being

received

On-screen display

Regular Monaural

NICAM Stereo

NICAM Bilingual

NICAM Monaural

(none)

ST NICAM

BIL. NICAM

NICAM

ATTENTION

Since the B.E.S.T. system works before recording actually

starts, there is a delay of approximately 7 seconds after 7

and 4 on the remote control are pressed, or 7 on the unit is

pressed. To make sure you record the desired scene or

programme in its entirety, first perform the following steps:

A Press and hold 9 and press 7 to engage the Record Pause

mode.

● The unit then automatically checks the condition of the

tape and, after approximately 7 seconds, re-enters Record

Pause mode.

B Press 4 to start recording.

If you want to bypass the B.E.S.T. system and begin recording

immediately, set “B.E.S.T.” to “OFF.”

(੬ pg. 53)

XV48EK_01.book Page 23 Thursday, November 18, 2004 10:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC hr xv48ex Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info