Bedienungsanleitung JVC hr xv48ex (Seite 60 von 72) (Deutsch, Englisch)

138393

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Filename [XV48EK_10Subsidiary.fm]

Masterpage:Left+

Page 60 November 18, 2004 10:44 pm

SUBSIDIARY SETTINGS (cont.)

NOTES:

● Fine tuning is performed automatically during Auto Channel

Set. If you want to perform tuning manually, refer to page 61.

● If you perform Auto Channel Set when the aerial cable is not

connected properly, “SCAN COMPLETED –NO SIGNAL–”

appears on the TV screen in step E. When this happens, make

sure of the aerial connection and press ENTER; Auto Channel

Set will take place again.

Manual Channel Set

Store channels that were not stored during Auto Set Up

(

੬ pg. 12), Preset Download (੬ pg. 13) or Auto Channel Set

(

੬ pg. 59).

Access the Main Menu screen.

Press SET UP.

Access the Confirmation screen.

Press rt to move the highlight bar (pointer) to

“MANUAL CH SET”, then press ENTER or e. The

Confirmation screen appears.

Select the channel position.

Select the band.

Input the channel.

Press the number keys to input the channel number you

want to store.

● Input “0” before any single number entries.

● To input the registered station name (ID –

੬ pg. 62), press e

until “– – – –” (ID setting) begins blinking, then press rt.

● For fine tuning adjustment, press e until “+/–” begins blinking,

then press rt. While tuning, “+” or “–” appears.

● When “L-2 SELECT” is set to “A/V” or “SAT,” the “DECODER”

setting cannot be changed. (

੬ pg. 54)

Enter new channel information.

Press ENTER and the Confirmation screen appears.

● Repeat steps C – F as necessary.

Close the Confirmation screen.

Press SET UP.

● To change positions, see “Changing Station Channel Position”

(

੬ pg. 61).

●

If you wish to set station names other than the ones registered

in your unit, see “Setting Station Names Manually” (

੬

pg. 61).

Deleting a Channel

Select the item.

Press rt w e until the item you want to delete begins

blinking.

Delete a channel.

Press &.

● The item directly beneath the cancelled one moves up one

line.

● Repeat steps A and B if necessary.

Close the Confirmation screen.

Press SET UP.

Press rt w e until an open

position in which you want to

store a channel begins

blinking, then press ENTER.

The Manual Channel Set

screen appears.

● The blueback screen and the

programme currently being

broadcast by the selected

channel appear alternately for 8

seconds each.

(Example) To store in position 6.

Press rt to change the

band between CH (regular)

and CC (cable), then press e.

ATTENTION

Guide Program numbers are not set when channels are

stored manually. (

੬ pg. 24, “VIDEO Plus+

Timer

Programming”)

Perform steps A and B of “Manual Channel Set” on page 60

to access the Confirmation screen before continuing.

XV48EK_01.book Page 60 Thursday, November 18, 2004 10:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC hr xv48ex Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info