658633
20
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
20
Setting the video channel/Setting the language
To view playback of a recorded tape,
or to watch a program selected by
the VCR's channel selector, the TV
must be set to channel 3 or 4 (video
channel).
NOTES:
If the unit does not operate properly,
or No key operation (by the unit and/
or the remote control): Static electric-
ity, etc., may affect the player's opera-
tion. Disconnect the AC power cord
once, then connect it again.
If no buttons are pressed for more than
60 seconds,the MENU screen will
return to normal TV operation
automatically.
Both the VCR and the DVD have their
own menu options (See page 38).
2
Press POWER to turn on the DVD/VCR.
3
Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to
select the VCR mode. The VCR indicator on the front panel
will light.
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
When a TV is connected with the 75 ohm coaxial cable only.
4
Turn ON the TV and set to CH 3 or 4 to correspond with the
channel selected in step 1.
5
Press TV/VCR to select the VCR position.
The VCR indicator will appear in the display window.
6
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.
Setting the Video Channel
Setting the language
3
Press SET UP MENU.
The VCR menu screen will appear.
Press
or to select SYSTEM
SETUP, then press ENTER.
If you use the unit for the first time
and press SET UP MENU, instead
of the main menu screen on the
right the SYSTEM SETUP menu
screen in step 2 may appear.
Press
or to select the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
1
2
Press or to select the
LANGUAGE option, then press
ENTER.
4
Press SET UP MENU until the MENU screen is cleared.
Press and hold 3 or 4 on the remote for 3 seconds in standby
mode. The video channel will start to flash
for 3 seconds in the display window.
1
2C50101BE(18-23) 13/5/03, 3:33 PM20
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC HR-XVC20U wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info