Bedienungsanleitung JVC HR-XVC20U (Seite 61 von 68) (Englisch)

658633

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

SYMPTOMS POSSIBLE SOLUTIONS

•Make sure the power cord is plugged in.

•Try another AC outlet.

•Power is off, check fuse or circuit breaker.

•Unplug unit, then plug it back in.

•Select the DVD or VCR mode before operating.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD.

DVD/VCR does not operate.

Problems and troubleshooting

Use the following check list for troubleshooting when you have problems with your unit. Consult your local

dealer or service outlet if problems persist.

Be sure all connections are properly made when using with other units.

DVD/VCR

PAGE

–

20,38

The remote control does not

function.

• Aim the remote control at the remote sensor.

• Operate within Approx. 5 Meters or reduce the light in the room.

• Clear the path of the beam.

• The batteries are weak. Replace the batteries.

• Check the batteries are inserted correctly.

• Check the frequency code is set correctly.

DVD

No picture.

•

Antenna connection is not correct or antenna cable is disconnected.

• The video channel is not in the correct position or the TV is not

set to the video channel 3 or 4.

• Check the unit is connected correctly.

• The video input selector of the TV is not set to VIDEO. Set to

VIDEO (or equivalent).

• Channel is set to the external mode.

No sound.

• Check the unit is connected correctly.

• Check the input selector of the amplifier is set properly.

• The unit is in the Special playback mode.

14~17

14~19

–

14~19

–

28,40

•Select proper language in the menu options.

Display is not shown in your

language.

Playback doesn’t start.

• No disc is inserted.

• The disc may be dirty. Clean up the disc.

• The unit cannot play DVD-ROMs, etc.

No CATV reception

•Check all CATV connections.

•Station or CATV system problems, try another station.

16,17

Noise bars on screen.

• Tracking adjustment beyond range of automatic tracking circuit.

Try Manual tracking adjustment.

• Video heads are dirty.

• The tape is worn or damaged.

VCR

•The erase prevention tab of the video cassette is broken off.

•The unit is in the external input mode.

TV recording does not work.

26,30

Timer recording does not work.

• The time is not set correctly.

• The recording start/end time is not set correctly.

• The TIMER has not been pressed ( is not lit).

23,25

–

No POWER but a picture appears

on the TV screen.

•During the Auto Clock operation, a video signal can be put out.

Please set the clock with Manual clock setting or wait until the

Auto Clock operation completed.

The DVD-keys on the RCU of the

other JVC RECEIVER/TV is not

effective.

•This is not a defect. Since this unit is combined type of DVD

and VCR, the remote code of DVD is individual.

12,13

2C50101BE(58-Back) 13/5/03, 3:33 PM61

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-XVC20U Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info