Bedienungsanleitung JVC HRDD868 (Seite 23 von 68) (Englisch)

30997

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

EN 23

Receiving Stereo And

Bilingual Programmes

Your recorder is equipped with a Sound-Multiplex decoder (A2) and

a Digital stereo sound decoder (NICAM) making reception of stereo

and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being

received will be displayed on the TV screen for a few seconds.

To Record Stereo And

Bilingual Programmes (A2)

● Stereo programmes are automatically recorded in stereo on

the Hi-Fi audio track (with the normal audio track recording

mixed L and R channel sound).

● Bilingual programmes are automatically recorded in bilingual

on the Hi-Fi audio track. The main soundtrack will be recorded

on the normal audio track.

Type of Broadcast

On-screen Display

Being Received

A2 Stereo ST

A2 Bilingual BIL

Regular Monaural (none)

NICAM Stereo ST NICAM

NICAM Bilingual BIL NICAM

NICAM Monaural NICAM

To Record NICAM Stereo And

Bilingual Programmes

The NICAM audio programme will be recorded on the Hi-Fi

audio track, and the Standard audio programme on the normal

audio track.

NOTES:

●

If the quality of stereo sound being received is poor, the

broadcast will be received in monaural with better quality.

●

Before playing back a programme recorded in stereo, or a

bilingual programme, refer to "Soundtrack Selection" (

੬

pg. 17).

● To listen to a stereo programme, press AUDIO until " " and

" " appear on the front display panel or "HIFI L R"

appears on the screen.

● To listen to a bilingual programme, press AUDIO until " " or

" " appears on the front display panel, or "HIFI L " or

"HIFI R" appears on the screen (as required).

● To listen to the Standard (regular monaural) audio while

receiving a NICAM broadcast, press AUDIO until "NORM"

appears on the front display panel or on the screen.

NOTE:

"O.S.D." must be set to "ON" or the on-screen displays will not

appear (

੬

pg. 9).

Hi-Fi Audio Recording Level

Control

Your recorder allows manual adjustment of the Hi-Fi audio

recording level.

ACCESS MAIN MENU

SCREEN

Press MENU.

ACCESS HI-FI REC LEVEL

CONTROL SCREEN

Press %ﬁ to move the highlight bar (pointer) to “REC

LEVEL CTL”, then press OK or

ADJUST AUDIO

RECORDING LEVEL

Press % or ﬁ.

● Press % or ﬁ briefly 5 times to move the on-screen's

audio levels by one division on the scale. To move the

audio levels faster, keep % or ﬁ pressed.

● Adjust the recording level while watching the

recorder's audio level meters. Set the level so that

maximum volume causes the meters to vary between

0dB to 4dB.

RETURN TO NORMAL

SCREEN

Press MENU.

NOTES:

●

Noise will increase if the recording level is too low, while

distortion will increase if the level is too high.

●

When you finished Hi-Fi Audio recording, be sure to set the

level control back to its centre position.

HI-FI REC LEVEL CONTROL

MIN

MAX

[

∞

]

[MENU] : EXIT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HRDD868 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info