Bedienungsanleitung JVC HRDD868 (Seite 27 von 68) (Englisch)

30997

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

EN 27

SET TAPE SPEED

Press SP/LP ( ) to set the tape speed.

SET VPS/PDC MODE

Press VPS/PDC to select "ON" or "OFF".

If "VPS/PDC ON" is displayed on the screen or "VPS/

PDC" is lit on the display panel, VPS/PDC is set to ON.

If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"

is not lit on the display panel, VPS/PDC is set to OFF.

੬ "VPS/PDC Recording" on page 29.

RETURN TO NORMAL SCREEN

Press PROG or OK. "PROGRAM COMPLETED" appears

on the screen for about 5 seconds, then normal screen

appears.

● Repeat steps 1 – 6 for each additional programme.

ENGAGE RECORDER’S TIMER MODE

Press ‰ (TIMER). The recorder turns off automatically

and ‰ appears on the display panel.

● To disengage the timer, press ‰ (TIMER) again.

NOTES:

●

To Change The Stop Time . . .

. . . press STOP +/– in step 3. You can compensate for

anticipated programme schedule delays this way.

●

To Timer-Record Weekly Or Daily Serials . . .

. . . in step 3, press WEEKLY (NUMBER key “9”) for weekly

serials or DAILY (NUMBER key “8”) for daily serials (Monday

– Friday). Either "WEEKLY" or "DAILY" appears on the screen.

Pressing the button again makes the corresponding indication

disappear.

●

You can programme this recorder to timer-record as many as 8

programmes. If you try to programme the recorder to record a

ninth, "PROGRAM FULL" appears on screen and "FULL" appears

on the front display panel. To record the extra programme, you

must first cancel any unnecessary programmes (

੬

pg. 30).

●

It is not possible to timer-record a TV programme with a

HOW

IEW

number which starts with "0".

ATTENTION

Regarding Guide Program Number Set

"GUIDE PROG SET" appears after performing step 3 if the

Guide Program number for the SHOWVIEW number you

entered has not been set.

● Press the NUMBER keys or %ﬁ to input the channel

position number on which your recorder receives that

station, then press OK or

to set the Guide Program

number. The SHOWVIEW program screen appears.

(Ex.) To timer-record a ZDF

programme with SHOWVIEW.

* If your recorder receives

ZDF on the channel

position 2, press OK or

after entering "2".

Satellite Tuner Users

To timer-record a satellite broadcast using SHOWVIEW:

1 Set "AV2 SELECT" to "AV2" (੬ pg. 39).

2 Perform steps 1 – 7.

3 Set the satellite tuner to the appropriate channel before

the selected programme begins.

4 Leave the satellite tuner's power on.

GUIDE PROG SET

GUIDE PROG TV PROG

2 – –

[

∞

] =

[PROG] : EXIT

Timer Warning

If you have programmed your

recorder to timer-record a

programme or a series of

programmes, a warning

appears on screen to tell you

that the recording is to start in

5 minutes.

NOTES:

●

The warning only appears if

you’re not in the Timer mode at that time.

●

If this recorder is being used as the player for tape

dubbing, the warning screen is recorded on the tape in

the other video recorder.

The warning blinks for the entire 5 minutes leading up to

the start of timer recording. To clear the display, press .

– WARNING–

TIMER RECORDING

TO START SOON

[ ]

1 2 3

4 5 6

7 8 9

– –:– –



DAILY

WEEKLY

SP/LP

VPS/PDC

PROG

STOP+/–

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HRDD868 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info