Bedienungsanleitung JVC HRDVS1 (Seite 72 von 80) (Englisch)

31003

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

SUBSIDIARY INFORMATION (cont.)

Before requesting service for a problem, use this chart to see if you can correct the trouble yourself. Small problems are often easily

corrected, and this can save you the trouble of sending your video recorder off for repair.

Troubleshooting

POSSIBLE CAUSE

● The mains power cord is discon-

nected.

● "‰" is displayed on the display panel

with Auto Timer set to "OFF".

● The batteries are discharged.

● The VCR/TV/SAT switch is in the

wrong position.

SYMPTOM

1. No power is applied to the

recorder.

2. The clock is functioning properly,

but the recorder cannot be powered.

3. The remote control won't function.

CORRECTIVE ACTION

Connect the mains power cord.

Press the ‰ button to turn the "‰"

indicator off.

Replace the dead batteries with new

ones.

Set the switch to the position corre-

sponding with the unit you want to

operate.

SYMPTOM

1. The tape does not run during

recording.

2. The tape will not rewind or fast-

forward.

CORRECTIVE ACTION

Press PLAY to turn the " " indicator

off.

Check the cassette.

SYMPTOM

1. The playback picture does not

appear while the tape is running.

2. Noise appears during visual search.

3. Noise appears during normal

playback (VHS deck).

4. The playback picture is blurred or

interrupted while TV broadcasts are

clear.

5. Breaks are noticeable in Hi-Fi

soundtrack (VHS deck).

POSSIBLE CAUSE

● If you’re using the AV or S-VIDEO

connection, the TV receiver is not set

to the AV mode.

● This is normal.

● The automatic tracking mode is

engaged.

● The video heads may be dirty.

● Automatic tracking is engaged.

CORRECTIVE ACTION

If you are using the AV or S-VIDEO

connection, set the TV to its AV mode.

Try manual tracking. (੬ pg. 26)

Consult your JVC dealer.

Engage and adjust tracking manually.

(੬ pg. 26)

POSSIBLE CAUSE

● " " is displayed on the display

panel.

● The tape is already fully rewound or

fast-forwarded.

POWER

PLAYBACK

TAPE TRANSPORT

CORRECTIVE ACTION

Insert a cassette, or using adhesive

tape, reseal the slot where the tab was

removed.

Insert a cassette, or set the erase

protection switch to "REC".

Set to the desired channel.

Confirm that the source is properly

connected.

Confirm that all units’ power switches

are turned on.

Set the input mode to "L-1", "L-2" or

"L-3".

POSSIBLE CAUSE

● VHS deck

There is no cassette loaded, or the

cassette loaded has had its Record

Safety tab removed.

● DV deck

There is no cassette loaded, or the

cassette loaded has had its erase

protection switch set to "SAVE".

● "L-1", "L-2" or "L-3" has been

selected as the input mode.

● The source (another video recorder,

camcorder) has not been properly

connected.

● All necessary power switches have

not been turned on.

● The input mode is not correct.

SYMPTOM

1. Recording cannot be started.

2. TV broadcasts cannot be recorded.

3. Tape-to-tape editing is not possible.

RECORDING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HRDVS1 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info