Bedienungsanleitung JVC HRJ470 (Seite 41 von 56) (Englisch)

31011

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Filename [HRJ670EU3.fm]

Masterpage:Right

NOTES:

●

Fine tuning is performed automatically during Auto Channel

Set. If you want to perform it manually, refer to page 44.

●

If you perform Auto Channel Set when the aerial cable is not

connected properly, “SCAN COMPLETED -NO SIGNAL-”

appears on the TV screen in step

. When this happens, make

sure of the aerial connection and press

; Auto Channel Set

will take place again.

●

If no sound accompanies the picture or the audio sounds

unnatural on some channels that have been stored by Auto Set

Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels

(

੬

pg. 43, “INFORMATION”).

Perform Auto Channel Set.

Press

twice.

●

If you have connected the

recorder and your TV via AV

connection (

੬

pg. 7), the

recorder automatically

performs the Preset

Download and the T-V LINK

screen will appear

(

੬

pg. 10).

●

The Auto Set screen appears,

and remains on screen while

the recorder searches for

receivable stations.

As Auto Channel Set progresses, the “

q“ mark on the TV screen

moves from left to right. Wait until the TV screen as shown in

step

appears.

View the Confirmation screen.

After “SCAN COMPLETED” is

displayed on the TV screen for

about 5 seconds, the

Confirmation screen looking

like the one to the right

appears. The stations your

recorder located appear on a

Confirmation screen —

channel positions (PR),

channels (CH) and station names (ID –

੬

pg. 45). The

blueback screen and the programme currently being

broadcast by the blinking station appear alternately for 8

seconds each. To view the next page, use the

button on the remote control.

●

The stations located in the selected country appear at the top

of the list.

●

The Guide Program numbers will also be set automatically

during Auto Channel Set.

Return to the normal screen.

Press

●

Using the Confirmation screen, you can skip or add channel

positions, enter station names and perform other operations.

Refer to pages 42 – 45 for the procedures.

●

Depending on reception conditions, the stations may not be

stored in order, and the station names may not be stored

correctly.

●

For information on scrambled broadcasts, refer to page 43.

IMPORTANT

●

In certain reception conditions, station names may not be

stored correctly, and Auto Guide Program Number Set may

not work properly. If the Guide Program numbers are not

set properly when you timer-record a TV programme using

the S

HOW

IEW

system, the recorder will record a TV

programme of a different station. When programming the

timer using the S

HOW

IEW

system, be sure to check the

desired channel is selected correctly (

੬

pg. 24,

“S

HOW

IEW

Timer Programming”).

●

Your video recorder memorizes all detected stations even if

reception of some of them is poor. You can delete those

stations with an unacceptable picture (

੬

pg. 43, “Delete

A Channel”).

Beginning End

HRJ670EU3.fm Page 41 Thursday, December 9, 1999 3:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HRJ470 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info