Bedienungsanleitung JVC HRJ472 (Seite 22 von 56) (Englisch)

31084

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Filename [HRJ670EU1.fm]

Masterpage:Left

RECORDING (cont.)

Elapsed Recording Time Indication

Set the counter display.

Press

– –:– –

until a counter reading appears on the front

display panel.

Reset the counter.

Press

0000

before starting recording or playback.

● The counter is reset to “0:00:00” and shows the exact elapsed

time as the tape runs. You can check the exact time of a

recording or playback.

Tape Remaining Time

Press

– –:– –

until the time remaining on the tape appears.

● The front display panel shows the tape remaining time with

“

y“ displayed.

● By pressing the

– –:– –

button, you can change the display to

show the counter reading, channel position*, clock time or

tape remaining time.

* Channel position is not displayed during playback.

NOTE:

Depending on the type of tape used, the tape remaining time

reading may not appear right away, or is not correct. “– –:– –”

may sometimes appear, or the display may blink on occasion.

Receiving Stereo And Bilingual

Programmes

(HR-J670/671/672/673/

674EU only)

Your recorder is equipped with a Sound-Multiplex decoder (A2)

and a Digital stereo sound decoder (NICAM) making reception

of stereo and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being

received will be displayed on the TV screen for a few seconds.

● To listen to a stereo programme, press

AUDIO

until

“HIFI L

jhR” appears on the TV screen.

● To listen to a bilingual programme, press

AUDIO

until

“HIFI L

j“ or “HIFI h R” appears on the TV screen.

● To listen to the standard (Regular Monaural) audio while

receiving a NICAM broadcast, press

AUDIO

until “NORM”

appears on the TV screen.

NOTE:

“O.S.D.” must be set to “ON” or the on-screen displays will not

appear (

੬

pg. 37).

To Record Stereo And Bilingual Programmes (A2)

Stereo programmes are automatically recorded in stereo on the

Hi-Fi audio track (with the normal audio track recording mixed L

and R channel sound).

● Bilingual programmes are automatically recorded in bilingual

on the Hi-Fi audio track. The main soundtrack will be

recorded on the normal audio track.

To Record NICAM Stereo And Bilingual

Programmes

The NICAM audio programme will be recorded on the Hi-Fi

audio track, and the Standard audio programme on the normal

audio track.

NOTES:

●

If the quality of stereo sound being received is poor, the

broadcast will be received in monaural with better quality.

●

Before playing back a programme recorded in stereo, or a

bilingual programme, refer to “Soundtrack Selection (HR-J670/

671/672/673/674EU only)” on page 19.

Type of Broadcast

Being Received

On-screen Display

A2 Stereo

A2 Bilingual

Regular Monaural

NICAM Stereo

NICAM Bilingual

NICAM Monaural

BIL.

(none)

ST NICAM

BIL. NICAM

NICAM

HRJ670EU1.fm Page 22 Wednesday, April 26, 2000 5:17 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HRJ472 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info