Bedienungsanleitung JVC HV28P37SUE (Seite 44 von 53) (Englisch)

474089

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

Additional preparation

HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English

 Devices which can output the S-

VIDEO signal (Y/C signal) such as

a S-VHS VCR

Connect the device to an EXT terminal other

than the EXT-1 terminal.

You can choose a video input signal from the

S-VIDEO signal (Y/C signal) and regular

video signal (composite signal). For details

of how to operate the device, see “S-IN (S-

VIDEO input)” on page 37.

 T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible

VCR to the EXT-2 terminal. If not, the T-V

LINK function will not work properly.

• When connecting a T-V LINK compatible

VCR to the EXT-2 terminal, be sure to

connect the Decoder to the VCR. If not,

the T-V LINK function may not work

properly. After you have registered TV

channels to the Programme numbers (PR),

set the DECODER (EXT-2) function for

the Programme number (PR) to ON in

order to unscramble a scrambled TV

channel. For details of operation, see

“DECODER (EXT-2)” on page 36.

 Connecting headphones

Connect the headphones with a stereo mini-

jack (of 3.5 mm in diameter) to the

headphone jack at the TV rear panel.

• No sound comes out from the TV

speakers when the headphones are

connected and only one screen is

displayed.

 Video/sound signal output from

the EXT-2 terminal

You can arbitrarily change over the output of

the video/sound signal from the EXT-2

terminal. It is useful when you want to dub

the video/sound from another device on the

VCR connected to the EXT-2 terminal. For

details on how to do this operation, see

“DUBBING” on page 39.

 TV output from the EXT-1 terminal

The output of video/sound signal of a TV

channel you are currently viewing is always

output from the EXT-1 terminal.

• Changing over a Programme number (PR)

also changes over the TV output from the

EXT-1 terminal.

• The video/sound signal from an EXT

terminal cannot be output.

• Teletext programmes cannot be output.

 Connecting Speakers/Amplifier

While referring to the Audio equipment

connection diagram, connect the audio

equipment you desire to the TV.

You can use external front speakers to listen

to the TV sound instead of the TV speakers.

Before connecting anything:

• Read the manuals provided with the

amplifier and speakers.

• Turn the TV and Amplifier off.

• To prevent magnetism from the speakers

adversely effecting the TV screen, use

magnetic-shielded speakers for the front

speakers.

• Note that connecting cables are not

supplied.

• The output from the AUDIO OUT

terminal is not interrupted by headphone

connection to the TV. You cannot cut the

sound from the front speaker even if you

connect a headphone to the TV.

• Adjust the volume of the external

speakers with the amplifier.

Back of the TV

1 Amplifier

2 Front speakers (Magnetic-shielded type)

HV-36P38SUE_Eng.book Page 42 Friday, September 26, 2003 11:10 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HV28P37SUE Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC HV28P37SUE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info