Bedienungsanleitung JVC KD-DB95BT (Seite 22 von 70) (Deutsch, Englisch, Französisch)

548150

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Symptom Remedy

“NOT SUPPORT” appears and

track skips.

Check whether the track is a playable format.

( 18)

“CANNOT PLAY” flashes and/

or connected device cannot be

detected.

• Check whether the connected device is compatible

with this unit and ensure the files are in supported

formats.

( 18)

• Reattach the device.

“READING” keeps flashing. • Do not use too many hierarchical levels and folders.

• Reload the disc or reattach the USB device.

The iPod/iPhone does not turn on

or does not work.

• Check the connection between this unit and iPod/

iPhone.

• Detach and reset the iPod/iPhone using hard reset.

Bluetooth®

No Bluetooth device is

detected.

• Search from the Bluetooth device again.

• Reset the unit.

( 3)

Pairing cannot be made. • Make sure you have entered the same PIN code to

both the unit and Bluetooth device.

• Delete pairing information from both the unit and the

Bluetooth device, then perform pairing again.

( 12)

“PAIRING FULL” appears. The number of registered devices has reached its limit.

Retry after deleting an unnecessary device.

( 15, DELETE PAIR)

“PLEASE WAIT” appears. The unit is preparing to use the Bluetooth function. If

the message does not disappear, turn off and turn on

the unit, then connect the device again.

“BT DEVICE NOT FOUND”

appears.

The unit failed to search for the registered Bluetooth

devices during

[AUTO CNNCT]

. Turn on Bluetooth

from your device and connect manually. (



)

Echo or noise occurs. • Adjust the microphone unit’s position. (



)

• Check the

[ECHO CANCEL]

setting. ( 

)

Symptom Remedy

Bluetooth®

Phone sound quality is poor. • Reduce the distance between the unit and the

Bluetooth device.

• Move the car to a place where you can get a better

signal reception.

“NOT SUPPORT” appears. The connected phone does not support Voice

Recognition feature.

“ERROR” appears. Try the operation again. If “ERROR” appears again,

check if the device supports the function you have

tried.

The unit does not respond

when you try to copy the

phonebook to the unit.

You may have tried to copy the same entries (as

stored) to the unit. Press

DISP

GT/P

to exit.

Sound is being interrupted or

skipped during playback of a

Bluetooth audio player.

• Reduce the distance between the unit and the

Bluetooth audio player.

• Turn off, then turn on the unit and try to connect

again.

• Other Bluetooth devices might be trying to connect

to the unit.

The connected Bluetooth

audio player cannot be

controlled.

• Check whether the connected Bluetooth audio

player supports Audio/Video Remote Control Profile

(AVRCP). (Refer to the instructions of your audio

player.)

• Disconnect and connect the Bluetooth player again.

“H/W ERROR” appears. Reset the unit and try the operation again. If “H/W

ERROR” appears again, consult your nearest service

center.

“BT ERROR PLS UPDATE”

appears.

Update the Bluetooth firmware. (



)

If you still have troubles, reset the unit. ( 3)

TROUBLESHOOTING

JS_JVC_KD-DB95BT_E_f_EN.indd 20JS_JVC_KD-DB95BT_E_f_EN.indd 20 12/19/2013 4:23:39 PM12/19/2013 4:23:39 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC KD-DB95BT Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info