Bedienungsanleitung JVC KD-T822BT (Seite 22 von 140) (Englisch, Holländisch, Portugiesisch, Spanisch)

804006

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

14 ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Bluetooth®

Default: [XX]

[SETTINGS]

[AUTO ANSWER] [01SEC] to [30SEC]: Answers an incoming call automatically in the selected

time (in seconds). ; [OFF]: Cancels.

[RING ILLUMI] [BLINK01] to [BLINK05] ([BLINK02]): Selects the blinking pattern for the

buttons as notification when there is an incoming call. ; [OFF]: Cancels.

Make a call

You can make a call from the call history, phonebook, or dialing the number.

Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode.

“(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch

to the other phone.

“(Second device name)” appears.

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

To return to the previous setting item, press .

[RECENT CALL] (Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

• “<” indicates call received, “>“ indicates call made, “M” indicates call

missed.

• “NO HISTORY” appears if there is no recorded call history or call number.

Press the volume knob to call.

[PHONEBOOK] (Applicable only if the phone supports PBAP.)

Press 2

/ 1

to select the desired letter (A to Z, 0 to 9, and OTHERS).

• “OTHERS” appears if the first character is other than A to Z, 0 to 9.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to

call.

• For using phonebook with this unit, make sure to allow access to or transfer

from your smartphone. Depending on the connected phone, the process

may be different.

• This unit can display only non-accent letters. (Accent letters such as “Ú” are

showns as “U”.)

[DIAL NUMBER]

Turn the volume knob to select a number (0 to 9) or character ( , #, +).

Press

to move the entry position.

Repeat step 1 and step 2 until you finish entering the phone number.

Press the volume knob to call.

[VOICE] Speak the name of the contact you want to call or the voice command to

control the phone functions. (See also the following “Make a call using voice

recognition”.)

Make a call using voice recognition

1 Press and hold to activate the voice recognition of the

connected phone.

2 Speak the name of the contact you want to call or the voice command

to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the

instruction manual of the connected phone for details.

KD_T822BT_E_B5A-3833-00_EN_4th Draft.indd 14KD_T822BT_E_B5A-3833-00_EN_4th Draft.indd 14 6/7/2021 12:00:50 AM6/7/2021 12:00:50 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC KD-T822BT Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC KD-T822BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info