Bedienungsanleitung JVC KD-X162 (Seite 16 von 88) (Englisch, Holländisch, Portugiesisch, Spanisch)

683002

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

[SUBWOOFER SET]*3 [ON]: Turns on the subwoofer output. ; [OFF]: Cancels.

[SUBWOOFER LPF]*1

[FRQ THROUGH]: All signals are sent to the subwoofer. ;

[FRQ55HZ]/[FRQ85HZ]/[FRQ120HZ]: Audio signals with frequencies

lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.

[SUB.W PHASE]*1*4

[REVERSE] (180°)/[NORMAL] (0°): Selects the phase of the subwoofer

output to be in line with the speaker output for optimum performance.

[FADER]

[POSITIONR06] to [POSITIONF06] ([POSITION00]): Adjusts the front

and rear speaker output balance.

[BALANCE]*5

[POSITIONL06] to [POSITIONR06] ([POSITION00]): Adjusts the left

and right speaker output balance.

[VOLUME ADJUST]

[LEVEL–15] to [LEVEL+06] ([LEVEL 00]): Presets the initial volume

level of each source by comparing to the FM volume level. (Before

adjustment, select the source you want to adjust. “VOL ADJ FIX” appears

if FM is selected.)

[AMPGAIN]

[LOWPOWER]: Limits the maximum volume level to 25. (Select if the

maximum power of each speaker is less than 50 W to prevent damaging

the speakers.) ; [HIGHPOWER]: The maximum volume level is 35.

[D.T.EXPANDER]

(Digital Track

Expander)

[ON]: Creates realistic sound by compensating the high-frequency

components and restoring the rise-time of the waveform that are lost in

audio data compression. ; [OFF]: Cancels.

[SPK/PREOUT] Depending on the speaker connection method, select the appropriate

setting for the desired output. (See “Speaker output settings”.)

*1 Displayed only when [SUBWOOFER SET] is set to [ON].

*2 Displayed only when [SPK/PREOUT] is set to [SUB.W/SUB.W].

*3 Displayed only when [SPK/PREOUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W].

*4 Selectable only if a setting other than [FRQTHROUGH] is selected for [SUBWOOFERLPF].

*5 This adjustment will not affect the subwoofer output.

AUDIO SETTINGS

Speaker output settings

[SPK/PRE OUT]

Select the output setting for the speakers

[SPK/PRE OUT]

, based on the speaker

connection method.

Connection via lineout terminals

For connections through an external amplifier. (Page 19)

Setting on

[SPK/PRE OUT]

Audio signal through lineout terminal

REAR/SW

[REAR/REAR] Rear speakers output

[REAR/SUB.W] (default) Subwoofer output

[SUB.W/SUB.W] Subwoofer output

Connection via speaker leads

You can also connect the speakers without using an external amplifier

but still being able to enjoy the subwoofer output with these settings.

(Page 19)

Setting on

[SPK/PRE OUT]

Audio signal through rear speaker lead

L (left) R (right)

[REAR/REAR] Rear speakers output Rear speakers output

[REAR/SUB.W] Rear speakers output Rear speakers output

[SUB.W/SUB.W] Subwoofer output (Mute)

[SUB.W/SUB.W]

is selected:

–

[FRQ120HZ]

is selected in

[SUBWOOFERLPF]

and

[FRQTHROUGH]

is not available.

–

[POSITION R01]

is selected in

[FADER]

and selectable range is

[POSITION R06]

[POSITION 00]

JS_JVC_KD_X262_E_EN_3.indd 12JS_JVC_KD_X262_E_EN_3.indd 12 8/14/2018 11:35:09 AM8/14/2018 11:35:09 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC KD-X162 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC KD-X162

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info