Bedienungsanleitung JVC KD-X362BT (Seite 26 von 144) (Englisch, Holländisch, Portugiesisch, Spanisch)

682999

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

For key layout on the faceplate, see page 3 or page 4.

1 Press and hold .

2 Perform ‘Select an item (page3 or 4)’ operation to select an

item (see the following table).

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press

Default: [XX]

[EQSETTING]

[PRESET EQ]

Selects a preset equalizer suitable to the music genre.

• Select [USER] to use the settings made in [EASYEQ] or [PROEQ].

[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/

[POP]/[R&B]/[USER]/[CLASSICAL]

Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies

in the audio signal to reduce the noise heard from outside the car or running

noise of the tyres.

[EASYEQ]

Adjusts your own sound settings.

• The settings are stored to [USER] in [PRESET EQ].

• The settings made may affect the current settings of [PRO EQ].

[SUB.W SP]*1*2: [00] to [+06] (Default: [+03]

[SUB.W]*1*3: [–50] to [+10] [00]

[BASS]: [LVL–09] to [LVL+09] [LVL00]

[MID]: [LVL–09] to [LVL+09] [LVL00]

[TRE]: [LVL–09] to [LVL+09] [LVL00])

[PRO EQ] Adjusts your own sound settings.

• The settings are stored to [USER] in [PRESET EQ].

• The settings made may affect the current settings of [EASYEQ].

[62.5HZ]

[LEVEL–09] to [LEVEL+09] ([LEVEL00]): Adjusts the level to memorize for each source.

(Before making an adjustment, select the source you want to adjust.)

[ON]: Turns on the extended bass. ; [OFF]: Cancels.

[100HZ]/[160HZ]/[250HZ]/[400HZ]/[630HZ]/[1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/

[6.3KHZ]/[10KHZ]/[16KHZ]

[LEVEL–09] to [LEVEL+09] ([LEVEL00]): Adjusts the level to memorize for each source.

(Before making an adjustment, select the source you want to adjust.)

[Q FACTOR]

[1.35]/[1.50]/[2.00]: Adjusts the quality factor.

[AUDIO CONTROL]

[BASS BOOST]

[LEVEL+01] to [LEVEL+05]: Selects your preferred bass boost level. ;

[OFF]: Cancels.

[LOUDNESS]

[LEVEL01]/[LEVEL02]: Boosts low or high frequencies to produce a well-

balanced sound at low volume. ; [OFF]: Cancels.

[SUB.W LEVEL]*1 [SPK-OUT]*2

(Not applicable when 3-way crossover is selected.)

[SUB.W00] to [SUB.W+06] ([SUB.W+03]): Adjusts

the output level of the subwoofer connected via speaker

lead. (Page 35)

[PRE-OUT]*3

[SUB.W–50] to [SUB.W+10] ([SUB.W00]): Adjusts

the output level of the subwoofer connected to the

lineout terminals (REAR/SW) through an external

amplifier. (Page 35)

[SUBWOOFER

SET]*3

[ON]: Turns on the subwoofer output. ; [OFF]: Cancels.

*1, *2, *3: (page 21)

JS_JVC_KD_X362BT_E_EN_01.indd 20JS_JVC_KD_X362BT_E_EN_01.indd 20 5/28/2018 2:59:41 PM5/28/2018 2:59:41 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC KD-X362BT Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC KD-X362BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info