Bedienungsanleitung JVC KW-DB93BT (Seite 21 von 152) (Englisch, Holländisch, Portugiesisch, Spanisch)

683004

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

ENGLISH 17

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Bluetooth mode settings

1 Press and hold .

2 Turn the volume knob to select an item

(

see the following table

)

, then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the instructions

stated on the selected item.

4 Press to exit.

To return to the previous setting item, press .

Default:

BT MODE

PHONE SELECT

Selects the phone or audio device to connect or disconnect.

“” appears in front of the device name when connected.

“” appears in front of the current playback audio device.

AUDIO SELECT

DEVICE DELETE

Turn the volume knob to select a device to delete, then press the knob.

Turn the volume knob to select

[YES]

[NO]

, then press the knob.

PIN CODE EDIT

(0000)

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press to move the entry position.

Repeat steps

and

until you finish entering the PIN code.

Press the volume knob to confirm.

RECONNECT ON

:The unit automatically reconnect when the last connected Bluetooth device is within range.;

OFF

:Cancels.

AUTO PAIRING ON

:The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android device)

when it is connected through USB input terminal.Depending on the operating system of the

connected device, this function may not work. ;

OFF

:Cancels.

INITIALIZE YES

:Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.).;

:Cancels.

INFORMATION MY



NAME

: Displays the unit name (“KW-DB9 BT”).;



ADDRESS

: Shows address of this unit.

You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.

BLUETOOTH®

Bluetooth compatibility check mode

You can check the connectivity of the supported

profile between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“BLUETOOTH” “CHECK MODE” appears.

“SEARCH NOW USING PHONE” “PIN IS 0000”

scrolls on the display.

2 Search and select “KW-DB9 BT” on the

Bluetooth device within 3minutes.

3 Perform (A), (B) or (C) depending on what

appears on the display.

(A) “PAIRING” “XXXXXX” (6-digit passkey):

Ensure that the same passkey appears on the

unit and Bluetooth device, then operate the

Bluetooth device to confirm the passkey.

(B) “PAIRING” “PIN IS 0000”: Enter “0000” on

the Bluetooth device.

confirm pairing.

After pairing is successful, “PAIRING OK” “[Device

Name]” appears and Bluetooth compatibility check

starts.

If “CONNECT NOW USING PHONE” appears, operate

the Bluetooth device to allow phonebook access to

continue.

“TESTING” flashes on the display.

JS_JVC_KW_DB93BT_E_EN_3.indd 17JS_JVC_KW_DB93BT_E_EN_3.indd 17 9/28/2017 12:25:24 PM9/28/2017 12:25:24 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC KW-DB93BT Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info