Bedienungsanleitung JVC LT-20A60 SU (Seite 17 von 33) (Englisch)

537208

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

ENGLISH - 16 -

 Press   or   button to select Noise

Reduction level Off or Minimum or Me-

dium or Maximum

Note 1:

At low signal level, the changings on the Noise Reduction

function are not effective when there is menu on the screen.

If the menu is removed, the effect of this function is seen. At

normal broadcasting, Noise Reduction changings are effec-

tive at once.

Note 2:

At moving pictures, while Noise Reduction is at maximum

level, some picture distortions may occur. If Noise Reduc-

tion is set to medium or minimum, the picture will improve.

Setting Hue

During Playback NTSC system, this will ap-

pear in AV mode only when NTSC video source

is applied. Otherwise, HUE option is invisible

in Picture menu in TV mode :

 Using 

 or   button select Hue.

 Press   button to increase hue level.

 Press 

 button to decrease hue level.

Reset

Press BLUE button to reset the picture modes

to factory default settings.

To Store the Settings

In the Picture Menu, all settings are stored

automatically.

Sound Menu

To change sound settings

As you enter the main menu, sound will be

the second item. In the main menu, select

Sound using 

 or   button, then enter

the sound menu pressing   /   or OK

button.

Setting Volume:

As you enter the sound menu, Volume will be

the first selected option.

 Press 

 button to increase volume.

 Press   button to decrease volume.

Or you can directly change the volume set-

tings using 

+ (to increase) or -  (to

decrease) button.

Setting Bass Level

 Using 

 or   button select Bass Level.

 Press   button to increase bass level.

 Press 

 button to decrease bass level.

Setting Treble Level

 Using 

 or   button select Treble

 Press 

 button to increase treble level.

 Press   button to decrease treble level

Setting Balance

It allows adjusting the distribution between the

left and right speakers.

 Using 

 or   button select Balance.

 Press   button to change balance right-

ward.

 Press 

 button to change balance leftward.

Hyper Sound

 Using 

 or   button select Hyper Sound

 Pressing   or   button will turn on or off

this feature.

Pseudo/spatial effect can be turned on or off

via the Hyper Sound item in the Sound menu

or by remote control. In Mono transmission

the left and right channels will be added at left

channel and dummy stereo effect will intro-

duced to end-user.

In stereo transmission it yields a phase differ-

ence between left and right channels. Hyper

Sound selection will be displayed on the

screen when the TV Status button is pressed

or programme is changed.

To Change Audio Out Settings

Audio Out is a sub-menu of Sound menu.

LT_20A60_SU.p65 31.08.2005, 08:1716

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC LT-20A60 SU Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC LT-20A60 SU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info