Bedienungsanleitung JVC LT-20A60 SU (Seite 27 von 33) (Englisch)

537208

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

ENGLISH - 26 -

the upper left corner of the screen when the

selected page is found.

 Press 

 button to display the selected

Teletext page.

To exit Teletext

 Press   button. The screen will switch to

TV mode.

Fastext and Toptext

Your TV supports the 7 page Teletext system.

When the page number of any of the 7 pages

in memory is entered, the system will not

search for the requested page; instead it will

display the page automatically.

 Press 

 button to move the Teletext

screen forward one page at a time.

 Press   button to move the Teletext

screen backward one page at a time.

For Fastext and Toptext

The subject-heading for the information may

have a particular colour.

 Press an appropriate RED, GREEN, YELLOW

or BLUE button in order to reach the relevant

page quickly.

For TOPTEXT

If Toptext transmission is present, colour

coded buttons will appear in status row.

If Toptext transmission is not present, status

row will not appear.

In Toptext mode the 

 or   com-

mands will request the next or previous page

respectively. If Toptext transmission is not avail-

able, in case of operation of these commands,

wraparound occurs. For example page 100

appears to be one greater than page 199.

Peripheral Equipment

Connections

There is a wide range of audio and video equip-

ment that can be connected to your TV.

Connection diagrams at the and of this sec-

tion show you where the different equipment

should be connected at the back side of the

TV.

Via the Euroconnector

Your TV set has 2 Euroconnector sockets. If

you want to connect peripherals (e.g. video,

decoder, etc.) which have Euroconnectors, to

your TV, use SCART input.

If an external device is connected via Euro-

connector sockets TV is switched to AV mode

automatically. In this case if both sockets are

connected SCART has the precedence.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible

VCR to the EXT.2 terminal. If not, the T-V LINK

function will not work properly.

 When connecting a T-V LINK compatible VCR

to the EXT.2 terminal, be sure to connect the

decoder to the VCR. If not, the T-V LINK func-

tion may not work properly. And then set the

Decoder (EXT-2) function for the channel to

ON to unscramble a scrambled channel.

RGB mode

If an equipment can output the RGB signals,

connect it to the EXT-1 or EXT-2 terminal.

EXT-2 S Mode

If the equipment connected to your TV set sup-

ports S-Video (Y/C) output from Euroconnec-

tor, you can have a better picture quality by

selecting EXT-2 S mode and connecting your

equipment to the EXT.2 (EXT-2 S) terminal of

TV. See your equipment's booklet to check if

your equipment has such feature.

Via the RCA jacks

If you have an equipment (such as a Cam-

corder) which has the RCA jacks, connect it to

the EXT-4 terminal with the video and audio

cables.

If you have a device which outputs component

LT_20A60_SU.p65 31.08.2005, 08:1726

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC LT-20A60 SU Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC LT-20A60 SU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info