Bedienungsanleitung JVC LT-26A61 (Seite 44 von 54) (Englisch)

56862

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Additional preparation

LT-32/26A61BU/SU / LCT1996-001A-U / English

 Equipment which can output the

S-VIDEO signal (Y/C signal) such

as an S-VHS VCR

Connect the equipment to an EXT-2 terminal.

You can choose between an S-VIDEO signal

(Y/C signal) and a regular video signal

(composite signal). For details of how to

operate the equipment, see “S-IN (S-VIDEO

input)” on page 37.

 T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible

VCR to the EXT-2 terminal. If not, the T-V

LINK function will not work properly.

• When connecting a T-V LINK compatible

VCR to the EXT-2 terminal, be sure to

connect the decoder to the VCR. If not,

the T-V LINK function may not work

properly.

• When you connect the decoder to the

VCR, after you have stored TV channels

in the programme numbers (PR) list, set

the DECODER (EXT-2) function for the

programme number (PR) to ON to

unscramble a scrambled TV channel. For

details, see “DECODER (EXT-2)” on

page 36.

 Connecting headphones

Connect the headphones with a stereo mini-

jack (3.5 mm diameter) to the headphone

socket at the TV rear panel.

• No sound comes from the TV speakers

when the headphones are connected.

 Video or sound signal output from

the EXT-2 terminal

You can change over the output of the video/

sound signal from the EXT-2 terminal. This

is useful when you want to dub the video/

sound from another device onto the VCR

connected to the EXT-2 terminal. For details

on how to do this, see “DUBBING” on

page 38.

• The signals from EXT-4 and PC IN

terminal cannot be output from EXT-2.

 TV output from the EXT-1 terminal

The video/sound signal of a TV channel you

are viewing is always output from the EXT-1

terminal.

• Changing over a programme number (PR)

also changes over the TV output from the

EXT-1 terminal.

• The video/sound signal from an EXT

terminal cannot be output.

• Teletext programmes cannot be output.

 Connecting to the computer

Connect the D-SUB cable with “DVI-I”-“D-

SUB” convert adapter from the computer’s

analogue RGB output terminal to the DVI

terminal on the back of the TV.

If you want to listen to the sound from the

computer, use an audio cable to connect the

VIDEO-3 AUDIO L/R sound input terminal

to the computer’s sound output terminal.

When the sound from the computer is mono,

connect to the VIDEO-3 AUDIO L terminal.

To watch images from a computer, start the

computer and press the G or p p buttons

to choose “PC”.

• Refer to the computer’s manual for a

detailed explanation of the connections at

the computer side.

• Ensure that the connectors are facing the

correct way when connecting.

• After connecting the D-SUB cable with

“DVI-I”-“D-SUB” convert adapter,

tighten the two screws to fix the connector

in place.

• Digital output with a DVI cable is not

supported.

LT-32&26A61BUSU_Eng.book Page 42 Tuesday, October 11, 2005 6:07 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC LT-26A61 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC LT-26A61

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info