Bedienungsanleitung JVC LT-32A61 (Seite 49 von 54) (Englisch)

56864

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Troubleshooting

ENGLISH

LT-32/26A61BU/SU / LCT1996-001A-U / English

• Videotaping teletext is not recommended

because it may not record correctly.

• When viewing images from commercially

available video software products, or

videos from videotapes which have been

recorded improperly, the top of the image

may be distorted. This is due to the

condition of the video signal. There is

nothing wrong with the TV.

• Since this TV is designed to make full use

of the resolution of the original video

source, the motion may appear unnatural

when the video source is input with

progressive-scanning component signals.

If this occurs, change the output setting of

the connected device to interlace-

scanning component signal output. See

the instructions that came with the device

for more information.

 Poor sound

• Have you adjusted BASS or TREBLE

properly? If not, follow the description

“BASS” or “TREBLE” on page 28.

• When TV channel reception is poor, it can

be hard to hear stereo or bilingual sound.

In this case, follow the description

“STEREO / I • II” on page 28 to hear the

sound more easily by changing it to a

mono sound.

 If the TV does not respond to the

remote control

• Have the batteries of the remote control

worn out? Follow the description “Putting

the batteries into the remote control” on

page 7 and replace them with new batteries.

• Have you attempted to use the remote

control from the sides or rear of the TV or

from more than seven metres away from the

TV? Use the remote control in front of your

TV or from less than seven metres away.

• When you are viewing a teletext

programme, you cannot operate the

menus. Press the b button to return to

the ordinary TV programme, and then try

operating the menus.

• If the TV suddenly stops responding,

disconnect the power cord of the TV from

the AC outlet. Connect them to the AC

outlet again to turn on the TV. If the TV

returns to a normal state, it is not a failure.

 Other issues

• When the SLEEP TIMER function

operates, the TV is automatically turned

off. If the TV suddenly turns off, try to

press the # (standby) button to turn on

the TV once again. If the TV goes back to

normal, there is no problem.

• When the TV is receiving a wide-screen

signal (WSS) or a signal from an external

device affecting the screen size, the

ZOOM mode automatically changes.

When you want to resume the previous

ZOOM mode, press the c button

again.

• It takes a short period of time from the

time an operation such as changing

channels is performed until an image is

displayed. This is not a fault. This is the

time needed for the image to stabilize

before it can be displayed.

• The TV may make a crackling sound due

to a sudden change in temperature. The

picture or sound may be normal. If you

hear crackling sounds frequently while

you are viewing the TV, there may be

other causes. As a precaution, ask your

service technician to inspect it.

Body_Eng.fm Page 47 Wednesday, October 12, 2005 1:29 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC LT-32A61 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC LT-32A61

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info