Bedienungsanleitung JVC LT-37A80 (Seite 20 von 21) (Englisch)

56917

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENGLISH

IMPORTANT! PREPARE USE

SETTINGS

TROUBLE?

DisplayFunctions

“T-V LINK” allows the TV to share information easily with a connected “T-V LINK” compatible device.

By using T-V LINK :

 You can send the channel information programmed on the TV to the “T-V LINK” compatible device, so that

both the TV and the external device have the same channel settings. When connecting a new external device,

channel information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer

to the external device’s manual.

 You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the

“DIRECT REC” feature. For more details, refer to the external device’s manual.

Technical information

Depending on the country selected during “AUTO PROGRAM”, the receivable broadcast system differs.

 FRANCE: Can receive SECAM-L.

To receive SECAM-L in countries other than France:

1) Change the “COUNTRY” to “FRANCE” in “AUTO PROGRAM”.

2) Press the “BACK” button to return to the menu and enter the channel using “INSERT” or “MANUAL”.

Troubleshooting (continued)

Problem Actions

page

What is “T-V LINK”?

Receivable broadcast systems

HDMI

Connect a “DVI“ device to “EXT-4 (HDMI)” using “DVI-HDMI” conversion cable. Connect analogue sound output of

the DVI device to L and R terminals in EXT-3.

 Set “AUDIO” in “HDMI SETTING” to “ANALOGUE” or “AUTO”  (P. 26)

 EXT-5 input does not support analogue sound (EXT-3).

 EXT-5 input does not support DVI devices.

Connect “DVI” devices

When “AUTO” is selected in ZOOM, the aspect ratio will turn to the ratio obtained from the information the TV

received.

 The aspect ratio will turn to the ratio obtained from WSS (Wide Screen Identiﬁcation Signal), video signal, or

control signal of the external devices. Without receiving the aspect information, it will be the setting in “4:3 AUTO

ASPECT” (P. 28)

AUTO in “ZOOM”

 Switch “SIZE” in “HDMI SETTING” to “1” or “2”.

Wrong screen size 26

 Use the cable marked with HDMI logo.

No picture, no sound –

 Check if the device is compliant with HDMI.



Switch “AUDIO” in “HDMI SETTING” to “DIGITAL” or “AUTO”

for HDMI devices, or “ANALOGUE” or “AUTO” for DVI devices.

(Not available for “EXT-5”.)

No sound

–

 Wait a little for the signal to stabilize when switching the

signal format for an “HDMI” device.

Green and distorted

screen

–

 It is not a malfunction. Some functions in the menu do not

display depending on the situation.

Some functions do not

work

–

 Is the “T-V LINK” compatible device connected to “EXT-2”?

 Is the SCART CABLE “Fully Wired”?

 Is the “T-V LINK” compatible device turned on?

After conﬁrming all the conditions above, press “OK” button

again.

“FEATURE NOT

AVAILABLE” appears

–

31-32 1/29/2007 3:26:36 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC LT-37A80 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC LT-37A80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info