Bedienungsanleitung JVC LX-WX50 (Seite 5 von 51) (Englisch)

660673

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

Important safety instructions

9. Do not look straight into the projector lens during operation. It may harm your sight.

10. Do not operate the projector lamp beyond the rated lamp life. Excessive operation of lamps

beyond the rated life could cause a lamp to break on rare occasions.

11. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45

minutes prior to removing the lamp assembly for replacement.

12. Never attempt to replace the lamp assembly until the projector has cooled down and is unplugged

from the power supply.

13. This projector is capable of displaying inverted images for ceiling mount installation. Use only a

proper ceiling mount kit for mounting.

14. THIS APPARATUS MUST BE EARTHED.

15. When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or

connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur

during operation of the unit, operate the disconnect device to switch the power supply off, or

disconnect the power plug.

High temperature Caution

The temperature of the cabinet around and above the exhaust vents can become hot during

projector operation. Touching these areas during operation could cause burns to the hands. Do

not touch these areas. Doing so may cause burns. Pay particular attention in preventing young

children from touching these parts. Additionally, do not place any metal objects on these areas.

Due to the heat from the projector, doing so could cause an accident or personal injury.

Ceiling mounting the projector

If you intend to mount your projector on the ceiling, we strongly recommend that you use a

proper fitting projector ceiling mount kit and ensure it is securely and safely installed.

If not, there is a safety risk that the projector may fall from the ceiling due to an improper

attachment through the use of the wrong gauge or length screws.

You can purchase a proper projector ceiling mount kit from the place you purchased your

projector. We recommend that you also purchase a separate Kensington lock compatible

security cable and attach it securely to both the Kensington lock slot on the projector and the

base of the ceiling mount bracket. This will perform the secondary role of restraining the

projector should its attachment to the mounting bracket become loose.

Do not attempt to disassemble this projector. There are dangerous high voltages inside which

may cause death if you should come into contact with live parts. The only user serviceable part is

the lamp. See page 39.

Under no circumstances should you ever undo or remove any other covers. Refer servicing only to

suitably qualified professional service personnel.

Please keep the original packing for possible future shipment. If you need to pack your projector

after use, adjust the projection lens to an appropriate position, put the lens cushion around the

lens, and fit the lens cushion and projector cushion together to prevent damage during

transportation.

When you think service or repair is required, take the projector only to a suitably qualified

technician.

RG2 IEC 62471-5:2015

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC LX-WX50 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC LX-WX50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info