660673
34
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
34
Controlling the projector remotely
iii. Press Exit to go back to the remote network operation page.
5. After pressing the button ‘Contact IT Help’, the HELP DESK window will appear at the upper
right corner. You will be able to deliver messages to RoomView™ software which is
connected to the same local area network.
For more information, visit http://www.crestron.com & www.crestron.com/getroomview.
Controlling the projector using PJLink™
This projector supports standard protocol PJLink™ for projector control and you can control and
monitor projector's operations using the same application among projectors of different models
and different manufacturers.
About PJLink™
To use PJLink™ function, the PJLink™ application software is required.
For the specifications of PJLink™, access to the Web site of Japan Business Machine and
Information System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)
This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports
all the commands defined by PJLink™ Class 1, and the compliance has been verified with
the PJLink™ standard specifications Version 1.4.
Utilizing the PJLink password function
To prevent unauthorized connection to the projector via PJLink™ application, the projector
includes an option for setting up password security.
To access the OSD menu, see "Using the OSD menu" for details.
1. Go to
SYSTEM SETUP: Advanced > LAN Settings, and press ENTER.
2. The LAN Settings page is displayed.
3. Press
to select PJLink Certification and press / to select On. The default password is
"admin".
4. Press
to select Change Password and press ENTER.
5. Enter the current password. Press / to select the digit and press
/ to select from 0-9,
A-Z, a-z or symbols. Press ENTER to confirm.
If you forget the password, please use the password "projectorcontroller".
PJLink™ supported commands
Commend Description Remark (Parameter)
POWR Power control
0 = Power off
1 = Power on
POWR? Inquiry about the power state
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC LX-WX50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC LX-WX50

JVC LX-WX50 Bedienungsanleitung - Deutsch - 57 seiten

JVC LX-WX50 Kurzanleitung - Englisch - 2 seiten

JVC LX-WX50 Bedienungsanleitung - Holländisch - 54 seiten

JVC LX-WX50 Bedienungsanleitung - Französisch - 55 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info