Bedienungsanleitung JVC nx f 30 (Seite 52 von 72) (Englisch)

371544

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Recording from a CD to a USB device

NOTE

• When you want to quit recording, press

When you press

after [ENTER] is pressed in

step 6, sound having been recorded before

pressed is stored. After pressing

, if you want

to disconnect the USB device, wait until the

“REC” indicator stops flashing and disappears.

• Do not operate the main unit when “PLEASE

WAIT...” is displayed on the TV screen or “WAIT”

is displayed in the display window. Wait until the

display disappears.

• If “NO USB” appears in the display window,

check the USB device or its connection.

• “CANT REC” appears in the display window if

recording cannot continue for some reason.

- The USB device may be connected

improperly. Check the connection.

- You may be trying to record write protected

tracks.

- You may be trying to record sound from a CD-

R or CD-RW. The Serial Copy Management

System (SCMS) protects copyright and allows

only first-generation digital copies from the

digitally recordable source. In short, you

cannot make “a copy of a copy”.

- You may be trying to record more than the

limited number of recordable tracks. You can

record up to 999 tracks to a group and 4 000

tracks to a USB device.

- The number of tracks that can be recorded to

the root group may be limited on the USB

device. The number of tracks may have

exceeded the limitation. In this case, select

another group or create a new group.

• Changes to the volume and quality of the sound

during recording do not affect the recorded

sound or the recorded sound level.

• The following functions do not affect the

recorded sound: the treble/bass adjustment

function (page 13), speaker volume level

function (page 13), surround mode function

(page 13), headphone surround function (page

14) and clear voice function (page 14).

• When “RANDOM” is selected, operating this

function automatically cancels random playback.

CAUTION

• Do not bump or move the main unit while

recording sound. Such movement may interfere

with recording.

• Do not disconnect the USB device during

recording, as this may cause malfunction.

Instead of step 3 on page 48, start

playback of the desired track.

• You can use the number buttons,

select a track.

• Finishing step 6 returns playback to the

beginning of the current track and only that track

is recorded.

NOTE

• You can also record only the desired track by

pausing the track instead of step 3 on page 48.

• When “RANDOM” is selected, operating this

function automatically cancels random playback.

Before proceeding to step 4 on page

48, program the desired tracks.

• Refer to steps 1 and 2 on pages 29 and 30 for

programming tracks.

• The following procedure is the same as steps 4

to 6 on page 48.

Recording only one track

Recording programmed tracks

Recording from a CD to a USB device (continued)

NX-F30[U].book Page 49 Tuesday, April 21, 2009 6:23 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC nx f 30 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC nx f 30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info