57210
16
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
11
Preparation
To view an image on the TV screen, select the
video signal type correctly according to the TV
after connecting the main unit to the TV.
IMPORTANT
Slide the remote control mode
selector to [SHIFT].
1 Turn on the main unit.
• Refer to “Turning on/off the main unit” on
page 13.
2 Press [DVD 3] or [USB 3].
• When a disc is loaded or a USB device is
connected, press 7 to stop playback.
3 Press [SCAN MODE].
• The current video signal type appears.
Example: When “RGB” is selected as the
video signal
4 Press 2 or 3 (cursor) to select the
video signal type suitable for the
TV.
• When the TV is connected to the [AV] termi-
nal, select “RGB” or “Y/C”. (“RGB” is the
recommended setting.)
• When the TV is connected to the [VIDEO]
terminal, select “RGB”.
• When the TV is connected to the [COMPO-
NENT] terminals, select “576P”.
When the TV is connected to the [HDMI MON-
ITOR OUT] terminal, the video signal type can
be selected as instructed below.
- Select “AUTO” for normal usage. (the ini-
tial setting)
- Select “576P”, “720P”, “1080I” or “1080P”
as needed. (The selectable settings differ
according to the resolution of the con-
nected TV.)
• You can also select the video signal type by
repeatedly pressing [SCAN MODE].
NOTE
“576”, “720” and “1080” refer to the number of
the scanning lines. Generally, the larger the
number, the better picture that can be obtained.
“I” refers to the interlaced format. “P” refers to
the progressive format. A better picture can be
obtained in the progressive format than in the
interlaced format.
When an HDMI video signal is output, the
“HDMI” indicator lights up in the display window.
When an HD video signal is output, the “HD”
indicator lights up.
When “576P”, “720P” or “1080P” is selected, the
“PROGRESSIVE” indicator lights up in the dis-
play window.
5 Press [ENTER].
NOTE
It is recommended that you slide the remote
control mode selector to [AUDIO] after selecting
the video signal type. Most of the other functions
can be used when the remote control mode
selector is at [AUDIO].
When the [AV] and [HDMI MONITOR OUT] ter-
minals are connected at the same time, the
image from the [AV] terminal is not displayed
properly.
Even if the main unit is turned off, the video sig-
nal type setting is stored.
Selecting the video signal
type
Remote control
mode selector
2/3 (cursor)/
ENTER
Preparation (continued) Do not connect the power cable until all other connections have been made.
NX-F3_NX-F7[B]-03.fm Page 11 Wednesday, March 19, 2008 5:13 PM
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC NX-F3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC NX-F3

JVC NX-F3 Bedienungsanleitung - Deutsch - 139 seiten

JVC NX-F3 Bedienungsanleitung - Holländisch - 139 seiten

JVC NX-F3 Bedienungsanleitung - Französisch - 139 seiten

JVC NX-F3 Bedienungsanleitung - Italienisch - 139 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info