CARE AND MAINTENANCE
CLEANING THE EXTERIOR
• Disconnect the system from
HANDLING CDS
• Do not touch the signal surfaces. Hold by the edges, or by one edge and the hole.
• Do not affix labels or adhesive tape to the label surfaces.
• Discs rotate at high speed inside the player
CLEANING CDS
• Dirty discs can cause poor sound quality
the inner edge toward the outer perimeter
• If a disc becomes dirty
any water drops with a dry cloth.
• Do not use record cleaning sprays or antistatic agents on discs.
or other volatile solvents which may cause damage to the disc surface.
TAPE CARE
• Do not expose tapes to sunlight or store in hot places. High temperatures may warp the shell or damage the
tape itself.
• Keep cassettes in their boxes when not in use.
• Cassette tapes can be erased by magnetic fields produced by magnets, electric motors, electrical transform-
ers, and other devices. Keep tapes away from magnets and magnetic fields.
CLEANING THE T
Iron oxide particles from the magnetic tape can build up on the parts that come in contact with the tape.
deposits can cause incomplete erasure, muffled playback sound, and might prevent automatic stop.
Toclean a cassette deck, open the compartment door and gently clean the heads, capstan, and
pinch wheel with a head cleaner
Always unplug the power cord before cleaning, and allow 30 minutes drying time after using a liquid cleaner
Clean heads after every 25 hours of use.
• Demagnetize the head occasionally with a head demagnetizing cassette (available from many audio equip-
ment stores).
• Never use any metal objects on or near the tape heads.
• Do not allow any cleaning material to fall into the tape assembly
REMOTE FUNCTIONS (FOR CD OPERA
STOP
PROGRAM REPEAT
SEARCH
-UP
SEARCH-DOWN
PAUSE
PLAY
SKIP
SKIP
When inserting batteries R03 (UM-4) /
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment on the back
of the unit.
TROUBLESHOOTING TIPS
SPECIFICA
CD player
CD capacity : 1 CD
Dynamic range : 60 dB
Signal-to-noise ratio : 75 dB
T
Frequency : FM 88 - 108 MHz
: AM 540 - 1 600 kHz
Antenna : T
Ferrite core antenna for
Cassette deck section
Frequency : 60 Hz - 10 000 Hz
Wow and flutter : 0.15% (WRMS)
General
Speaker : 9 cm cone × 2 (4 Ω)
Power : 4 W (2 W + 2 W) at 4 Ω (10% THD) (IEC268-3)
Output terminals : PHONES × 1 ( ∅ 3.5 mm, stereo)
Power : AC 230 V Ó, 50 Hz
DC 9 V (“R20 (SUM-1)/D (13D)” × 6)
Power : 12 W (at operation), 3 W (on standby)
Dimensions : 420 mm (W) × 178 mm (H) × 249 mm (D)
Mass : Approx. 3.2 kg (without batteries)
Accessories provided : AC power cord × 1
Remote control unit × 1
Batteries for the remote control unit R03 (UM-4)/AAA× 2
SKIP/SEARCH-DOWN
(backward)
PROGRAM
STOP
SKIP/SEARCH-UP (forward)
REPEA
PLA
Problem Solution
• Make sure power cord is securely plugged into the
the batteries are fresh).
• Unplug the unit for a moment, and then plug it back in again.
• Check the outlet by plugging in another device.
• Adjust volume setting.
• Make sure you have selected the correct function: CD, T
and the headphones are disconnected.
• Adjust the FM telescopic antenna for better FM reception.
• Rotate the unit to achieve better
•Try turning off electrical appliances near the unit, such as
vacuum cleaners, or fluorrescent lights.
• Make sure the tray contains a CD.
• Make sure the CD’s label is facing up.
• Make sure that pause mode is not activated.
• Make sure CD function is selected.
• Clean the CD (as explained in “CARE
• Check CD for warping, scratches, or other damage.
• Check for vibration or shock that may affect the unit; move system if
necessary
• Inspect the recording head and clean it if necessary
• Demagnetize recording head (as explained in “CARE
MAINTENANCE”).
System doesn’t turn on.
No sound
Poor radio reception
CD doesn’t play
CD sound skips.
Distorted or noisy
recordings
Design and specifications are subject to change without notice.
RECORDING FROM THE RADIO
1. Insert a cassette tape into the tape deck and close the door
2. Move FUNCTION to TUNER and select a radio station.
3. Press REC to begin recording. REC and PLA lock down.
4. Press STOP/EJECT to end recording.
5. T
OFF/T
RADIO RECORDING TIPS
•To temporarily pause the recording, press P on the cassette deck. Press P again to resume
recording.
SYNCHRONIZED RECORDING FROM
1. Insert a cassette tape into the tape deck and close the door
2. Move FUNCTION to CD.
3. Insert the CD you want to record into CD compartment.
4. Select the track you want to record by pressing (skip/search) or (skip/search).
5. Press REC
to start recording.
Note that the tape continues to run when the CD finishes playing, or the CD continues to play when the tape
reaches the end.
TIP
Using the P button on the cassette deck instead of the ST button to momentarily
interrupt recording gives you a much cleaner sound recording.
U
USING THE CD
PUSH
PLAY/P
STOP
HBS
HBS
REPEAT
RANDOM
PROGRAM
C
D
P
L
A
Y
M
O
D
E
REMOTE
SENSOR
LOADING
1. Move FUNCTION to CD; “– –” flashes, then “no” appears in the display if no CD is loaded.
2. Press ) PUSH to open the CD door
3. Place a CD into the tray with the label facing up.
4. Close the CD door
5. T) PUSH, grasp the CD by its edges, and carefully pull it out.
PLA
Press PLA to play all the tracks in order starting with track 1.
the display
Note: Press PLA
to temporarily stop the CD. The indicator and the track number flash in the
display
again to resume playing the CD.
• Adjust VOLUME to a comfortable level.
• Press STOP 7 to stop playing the CD. W) PUSH to
open the CD compartment door and remove the CD.
AUTOMATIC SEARCH
Automatic search lets you quickly locate the beginning of any track on the CD, including the track currently
playing. If the CD is playing:
• Press (skip/search) once to return to the beginning of the current track, press twice to return to the
beginning of the previous track.
• Press
(skip/search) to skip to the beginning of the next track.
If the CD is stopped, repeatedly press
(skip/search) or (skip/search) until the display shows the number
of the track you want to play . The CD player starts playing the selected track.
TRACK SEARCH
• In play mode, press and hold (skip/search) to move forward through a track at high speed.
• In play mode, press and hold (skip/search) to move backward through a track at high speed.
REPEA
The REPEA
choices, continuously press and release REPEA
The following chart illustrates how REPEA
NORMAL REP 1 REP ALL
RANDOM
Press RANDOM so that “RAND” appears in the display , and the tracks
are played in random order
Toquit random play
PROGRAMMING
Press PROGRAM to enter program edit mode.
“00” and “PROG” will flash in the display (skip/search) or (skip/search) to select the track
number and press PROGRAM to store the number in program place. Y
to 20 tracks. Note that programming more than 20 tracks will overwrite the tracks already programmed.
During program play
time you press PROGRAM, the program number appears, then the corresponding track number flashes in order
from the first programmed track.
To clear the entire program in the memory
This unit has been designed only to play back the following CDs.
• Digital audio CD
• Recordable digital audio CD (CD-R)
• Rewritable digital audio CD (CD-RW)
When playing a CD-R or CD-RW
You can play back finalized CD-R or CD-R
different format, erase all the data on the CD-R
•You can play back CD-R or CD-RW like an audio CD.
• Some CD-R or CD-RW may not be played back on this unit because of their disc characteristics, damage or
stain on them, or if the player lens is dirty
• The reflection factor of CD-RW is lower than that of other CDs, possibly causing CD-RW to take longer time
to read.
• CD-R and CD-RW of MP3 format cannot be played back.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital
the use of Non-DVD side of a DualDisc on this product may not be recommended.
CD door ) PUSH
REPEA
RANDOM
skip/search
backward
PLA
STOP 7
PROGRAM
skip/search
forward
FUNCTION
