Bedienungsanleitung JVC RX-5060 (Seite 20 von 71) (Englisch, Französisch)

57258

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

English

Speaker distance—FRONT L DIST, FRONT R DIST,

CENTER DIST, SURR L DIST, SURR R DIST

Set the distance from the listening point within the range of

0.3 m (1 ft) to 9.0 m (30 ft), in 0.3 m (1 ft) intervals.

•When shipped from the factory, distance for each speaker is

set to “3.0m (10FT).”

Note:

You cannot set the speaker distance for the speakers you have

selected “NONE.”

Ex. In the above case, set the speaker distance as follows:

Front speakers: 3.0m (10FT)

Center speaker: 3.0m (10FT)

Surround speakers: 2.7m (9FT)

Setting the Bass Sounds

You can adjust subwoofer and bass sounds precisely according to

your preference.

Subwoofer output—SUBWOOFER OUT

The subwoofer emits the LFE signals* and the bass elements of

each speaker set to “SMALL.”

You can make the bass elements of the front speaker channels

(MAIN) emitted through the subwoofer.

Select one of the following:

SWFR LFE: Select to emit the LFE signals and the bass

elements of each speaker set to “SMALL.”

SWFR LFE+MAIN: Select to emit the bass elements of the

front speakers’ channels (MAIN) adding to the

effect of “SWFR LFE” when no bass elements

are emitted through the subwoofer.

Notes:

• When “SUBWOOFER” is set to “SUBWOOFER NO” (see the left

column), this function is not available.

* The LFE signals are emitted only when playing the following

software with the LFE signals:

– Dolby Digital multi channel software

– DTS multi channel software

When playing an analogue source or a linear PCM software, no

LFE signals are emitted.

Setting the Speakers

To obtain the best possible surround effect from the Surround and

DSP modes, register the setting about the speaker arrangement after

all connections are completed.

• If you have used Quick Speaker Setup on page 16, this setting is

not required.

Subwoofer setting—SUBWOOFER

Select whether you have connected a subwoofer or not.

SUBWOOFER YES: Select when a subwoofer is connected.

SUBWOOFER NO: Select when no subwoofer is used.

Note:

If you have selected “SUBWOOFER NO” for the subwoofer, you

cannot use the SUBWOOFER OUT ON/OFF button on the front

panel.

Speaker size—FRNT SPEAKERS, CNTR SPEAKER,

SURR SPEAKERS

Select the size for each connected speaker.

LARGE: Select when the speaker size is relatively large.

SMALL: Select when the speaker size is relatively small.

NONE: Select this when you have not connected a

speaker. (Not selectable for the front speakers.)

Notes:

•Keep the following comments in mind as reference when

adjusting.

– If the size of the cone speaker unit built in your speaker is

larger than 12 cm, select “LARGE,” and if it is smaller than 12

cm, select “SMALL.”

• If you have selected “SUBWOOFER NO” for the subwoofer

setting, you can only select “LARGE” for the front speakers.

• If you have selected “SMALL” for the front speakers, you cannot

select “LARGE” for the center and surround speakers.

Setting the Speaker Distance

The distance from your listening point to the speakers is another

important element to obtain the best possible sound of the Surround

and DSP modes. Set the distance from your listening point to the

speakers.

By referring to the speaker distance setting, this unit automatically

sets the delay time of the sound through each speaker so that sounds

through all the speakers can reach you with the same timing.

• If you have used Quick Speaker Setup on page 16, this setting is

not required.

Measuring unit—DISTANCE UNIT

Select which measuring unit you use.

UNIT METER: Select to set the distance in meters.

UNIT FEET: Select to set the distance in feet.

Basic Settings

2.1 m

(7 ft)

2.4 m

(8 ft)

2.7 m

(9 ft)

3.0 m

(10 ft)

3.3 m

(11 ft)

16-20_RX-5060B[C].p65 06.1.19, 19:2518

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC RX-5060 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC RX-5060

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info