Bedienungsanleitung JVC RX-6000VBK (Seite 32 von 39) (Englisch)

602848

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

English

Sound control section (Amplifier)

You can always perform the following operations:

SURROUND: Turns on or off the Surround modes —

Dolby Pro Logic, Dolby Digital, and DTS

Digital Surround.

SURROUND MODE: Selects the DSP modes.

After pressing SOUND, you can perform the following operations:

SUBWOOFER – / +: Adjusts the subwoofer output level.

CENTER – / +: Adjusts the center speaker output level.

REAR•L – / +: Adjusts the left rear speaker output level.

REAR•R – / +: Adjusts the right rear speaker output level.

EFFECT: Selects the effect level.

TEST: Turns on or off the test tone output.

Note:

After adjusting sounds, press the corresponding source selecting

button or CD-DISC to operate your target source by using the 10

keys; otherwise, the 10 keys cannot be used for operating your target

source.

Turntable

After pressing PHONO, you can perform the following operations

on a turntable:

3: Starts playing.

7: Stops operations.

CD player

After pressing CD, you can perform the following operations on the

CD player:

3: Starts playing.

4: Returns to the beginning of the current (or

previous) track.

¢¢

¢: Skips to the beginning of the next track.

7: Stops playing.

8: Pauses playing. To release it, press

1 – 10, +10: Selects a track number directly.

For track number 5, press 5.

For track number 15, press +10, then 5.

For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC

components are preset in the remote control.

IMPORTANT:

To operate JVC’s audio components using this remote control:

• You need to connect JVC audio components through the COMPU

LINK-3 (SYNCHRO) jacks (see page 26) in addition to the

connections using cables with RCA pin plugs (see page 5).

• Aim the remote control directly at the remote sensor on the receiver.

• If you use the buttons on the front panel to choose a source, the

remote control will not operate that source. To operate a source with

the remote control, the source must be selected using source

selecting buttons on the remote control.

• To operate the cassette deck or MD recorder using the COMPU

LINK remote control system, set the source name correctly. (See

page 11.)

• Refer also to the manuals supplied with your components.

Tuner

After pressing FM/AM, you can perform the following operations:

FM/AM: Alternates between FM and AM.

1 – 10, +10: Selects a preset channel number directly.

For channel number 5, press 5.

For channel number 15, press +10, then 5.

For channel number 20, press +10, then 10.

RM-SRX6000J REMOTE CONTROL

SURROUND

MODE

SOUND

TV/VIDEO

CD-DISC

321

– SUBWOOFER +TEST

EFFECT

– CENTER +

– REAR•L + – VCR CH +

VCR

AUDIO

SLEEP

+10

– REAR•R +

ENTER

TAPE/MD

PHONO FM/AM

MUTING

TV SOUND/DBS

VCR

ANALOG/DIGITAL

TV VOL

TV CH

DVD

–

VCR CH

VOLUME

POWER

–

7/P

EN27_33.RX-6000V[J] 99.12.14, 4:00 PM29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC RX-6000VBK Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info