Bedienungsanleitung JVC RX-6040B (Seite 15 von 44) (Englisch)

602843

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Listening with headphones:

You can enjoy not only stereo software but also multi-

channel software through the headphones. (Sounds are

down-mixed to the front channels while playing multi-channel

software.)

1 Press SPEAKERS ON/OFF to deactivate the speakers.

“HEADPHONE” appears for a while, and the H.PHONE

indicator lights on the display.

• If the Surround or DSP mode has been activated, “3D H

PHONE” appears for a while (and the DSP indicator also lights

up on the display)—3D Headphone Mode (3D H PHONE). For

details, see page 26.

2 Connect the headphones to the PHONES jack on the front

panel.

• If you do not deactivate the speakers, no sound comes out of

the headphones.

After using the headphones, disconnect the headphones, then press

SPEAKERS ON/OFF again to activate the speakers.

CAUTION:

Be sure to turn down the volume....

• Before connecting or putting on headphones, as its high

volume can damage both the headphones and your hearing.

• Before turning on speakers again, as its high volume may

come out of the speakers.

Turning On and Off the

Subwoofer Sound

You can cancel the subwoofer output even though you have

connected a subwoofer and have set “SUBWOOFER” to

“SUBWOOFER YES” (see page 20).

Press SUBWOOFER OUT ON/OFF to cancel the subwoofer

output.

Each time you press the button, subwoofer output is deactivated

(“SUBWOOFER OFF”) and activated (“SUBWOOFER ON”)

alternately.

• When subwoofer output is canceled, the

indicator goes off.

Bass sounds (and LFE signals) will be emitted through the front

speakers.

Notes:

• When subwoofer output is activated, you can also adjust the

subwoofer output level. For details, see page 24.

• You cannot deactivate the subwoofer output when you set “SMALL”

for the front speakers on the speaker size setting (see page 20) or

using Quick Speaker Setup (see page 18).

• You cannot activate the subwoofer output when you have set

“SUBWOOFER” to “SUBWOOFER NO” (see page 20).

• When you change the “SUBWOOFER” setting from “SUBWOOFER

NO” to “SUBWOOFER YES” (see page 20), subwoofer output is

automatically activated.

Selecting the Analog or Digital Input Mode

When you have connected digital source components using the both

analog and digital terminals (see pages 7 to 10), you can select the

input mode—either digital or analog—for these components.

Before you start, remember...

The digital input terminal setting should be correctly done for

the sources you want to select the digital input mode (see

“Setting the Digital Input Terminals” on page 22).

1 Press one of the source selection buttons (DVD, TV

SOUND, CD, TAPE/CDR*) for which you want to

change the input mode.

If “TAPE” is selected as the source, digital input mode is not

available. To change the source name, see “Changing the

Source Name” on page 14.

2 Press INPUT DIGITAL to select “DIGITAL AUTO.”

The DIGITAL AUTO indicator lights up on the display.

• When using the remote control, press ANALOG/DIGITAL.

Each time you press the button, the analog (ANALOG) and

digital (DIGITAL AUTO) input modes alternate.

• When selecting “DIGITAL AUTO,” the following indicators

indicate the digital signal format of the incoming signal.

: Lights up when Linear PCM signals come

in.

: Lights up when Dolby Digital signals

come in.

: Lights up when conventional DTS signals

come in.

: Lights up when DTS 96/24 signals come

in.

No indicator lights up when the receiver cannot recognize the

digital signal format of the incoming signals.

Note:

For details about the digital signal formats, see pages 25 and 26.

Continued on the next page

Remote

NOT

Remote

NOT

11-15_5040&6040[J]f.p65 03.12.20, 14:2813

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC RX-6040B Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info