Bedienungsanleitung JVC RX-6040B (Seite 20 von 44) (Englisch)

602843

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Quick Speaker Setup

Quick Speaker Setup helps you to easily and quickly register the

speaker size and speaker distance according to your listening room

to create the best possible surround effect.

• You can also register each speaker’s information manually.

For details, see page 20.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

1 Press QUICK SPEAKER SETUP.

“SPK=” and the initial speaker channel number appear.

• Depending on your model, it will be either “5.0CH” or

“5.1CH.”

2 Turn MULTI JOG to select an appropriate

number of the connected speakers (speaker

channel number).

As you turn the jog, the speaker channel number changes as

follows.

• For the details of speaker channel number, see “Speaker

channel number and the size.”

3 Press in MULTI JOG (PUSH SET).

“ROOM SIZE=” and the initial room size setting appear.

4 Turn MULTI JOG to select an appropriate room

size to match to your listening room.

As you turn the jog, the room size changes as follows.

• To select your appropriate room size, see “Room size and the

speaker distance.”

Basic Settings

Some of the following settings are required after connecting and positioning your speakers while others will make

operations easier. You can use QUICK SPEAKER SETUP to easily set up your speaker configuration.

5 Press in MULTI JOG (PUSH SET).

“COMPLETE” appears on the display, then goes back to the

source indication.

Notes:

• This procedure will not be completed if you stop in the middle of the

setting process.

• Once Quick Speaker Setup is performed, the speaker output levels

are also set to appropriate values automatically (common to all

sources). If you want to set the speaker output levels separately for

each source, see “Adjusting the Speaker Output Levels” on page

24.

Speaker channel number and the size

You can find how each of the speaker size is defined according to

the number of connected speakers (speaker channel “CH” number)

you select.

• Subwoofer (S.WFR) is counted as 0.1 channel.

The size of the connected speakers

L/R C LS/RS S.WFR

2.0CH LARGE NONE NONE NO

2.1CH SMALL NONE NONE YES

3.0CH LARGE SMALL NONE NO

3.1CH SMALL SMALL NONE YES

4.0CH LARGE NONE SMALL NO

4.1CH SMALL NONE SMALL YES

5.0CH LARGE SMALL SMALL NO

5.1CH SMALL SMALL SMALL YES

Room size and the speaker distance

According to the selected room size, speaker distance for each

activated speaker is set as follows:

Size Speaker Distance

L L/R 3.0 m (10 ft)

(Large) C 3.0 m (10 ft)

LS/RS 3.0 m (10 ft)

M L/R 2.7 m (9 ft)

(Medium) C 2.4 m (8 ft)

LS/RS 2.1 m (7 ft)

S L/R 2.4 m (8 ft)

(Small) C 2.1 m (7 ft)

LS/RS 1.5 m (5 ft)

Note:

In the tables above, “L” stands for the left front speaker, “R” for the

right front speaker, “C” for the center speaker, “LS” for the left

surround speaker, “RS” for the right surround speaker, and “S.WFR”

for the subwoofer.

Remote

NOT

5.0CH “ 5.1CH “ 2.0CH “ 2.1CH “ 3.0CH “

3.1CH “ 4.0CH “ 4.1CH “ (Back to the beginning)

L (Large) S (Small)

M (Medium)

18-22_5040&6040[J]f.p65 03.12.18, 15:2318

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC RX-6040B Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info