Bedienungsanleitung JVC RX-6040B (Seite 30 von 44) (Englisch)

602843

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

: Suitable for audio sources

: Suitable for video sources

Using the DSP Modes

This unit activates a variety of DSP modes automatically. The basic settings and adjustments stored (see pages 18 to

24) are applied automatically.

Early reflections

Reflections from

behind

Direct sounds

Reproducing the Sound Field

The sound heard in a concert hall, club, etc. consists of direct sound

and indirect sound—early reflections and reflections from behind.

Direct sounds reach the listener directly without any reflection. On

the other hand, indirect sounds are delayed by the distances of the

ceiling and walls. These direct sounds and indirect sounds are the

most important elements of the acoustic surround effects.

DSP modes can create these important elements, and give you a real

“being there” feeling.

Introducing the DSP Modes

DSP modes include the following modes—

• Digital Acoustic Processor (DAP) modes—HALL 1, HALL 2,

LIVE CLUB, DANCE CLUB, PAVILION, THEATER 1,

THEATER 2

• ALL CH STEREO

• MONO FILM—Used for all types of 2-channel signals (including

Dual Mono signal)

3D Headphone Mode

You can also enjoy the DSP effect (except All Channel Stereo

mode) through the headphones.

If you press DSP when the front speakers are deactivated, 3D

Headphone Mode is activated without respect to the type of

software played back. “3D H PHONE” appears on the display

and the DSP and H.PHONE indicators light up.

To use DSP modes, press DSP so that the DSP modes change as

follows.

The DSP indicator also lights up on the display.

HALL 1 =

HALL 2 =

LIVE CLUB

DANCE CLUB =

PAVILION =

ALL CH STEREO

= THEATER 1 =

THEATER 2 =

MONO FILM

(Back to the beginning)

Digital Acoustic Processor (DAP) modes

You can use the following DAP modes in order to reproduce a more

acoustic sound field in your listening room.

HALL 1: Reproduces the spatial feeling of a large shoebox-

shaped hall designed primarily for classical

concerts. (Its seating capacity is about 2000.)

HALL 2: Reproduces the spatial feeling of a large vineyard-

shaped hall designed primarily for classical

concerts. (Its seating capacity is about 2000.)

LIVE CLUB: Reproduces the spatial feeling of a live music club

with a low ceiling.

DANCE CLUB: Reproduces the spatial feeling of a rocking dance

club.

PAVILION: Reproduces the spatial feeling of an exhibition hall

with a high ceiling.

THEATER 1*: Reproduces the spatial feeling of a large theater

where the seating capacity is about 600.

THEATER 2*: Reproduces the spatial feeling of a small theater

where the seating capacity is about 300.

The built-in Dolby Pro Logic II decoder is activated when playing

back 2-channel analog or digital source. The

PRO LOGIC

indicator lights up.

When using the DAP mode, the sounds come out of all the

connected and activated speakers.

• If surround speakers are set to “NONE” in the speaker setting,

JVC’s original 3D-PHONIC processing (which has been

developed to create the surround effect through the front speakers

only) is used. The 3D-PHONIC indicator lights up on the display.

25-29_5040&6040[J]f.p65 03.12.18, 15:2928

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC RX-6040B Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info