Bedienungsanleitung JVC RX-6042S (Seite 14 von 44) (Englisch)

602844

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Signal indicators

Speaker indicators

On the remote

Speaker and signal indicators on the display

By checking the following indicators, you can easily confirm which

speakers you are activating and which signals are coming into this

receiver.

What speaker indicators light depends on the speaker setting

(for details, see “Setting the Speakers” on page 20).

• The frames of “L,” “C,” “R,” “LS,” and “RS” light up, when the

corresponding speakers are set to “LARGE” or “SMALL.” Sounds

come out of the speakers whose speaker indicators is lit on the

display.

• The

indicator lights up when the subwoofer is activated (see

pages 13 and 20).

The signal indicators light up to show the incoming signals.

L:•When digital input is selected: Lights up when the left

channel signal comes in.

• When analog input is selected: Always lights up.

R:•When digital input is selected: Lights up when the right

channel signal comes in.

• When analog input is selected: Always lights up.

C: Lights up when the center channel signal comes in.

LFE: Lights up when the LFE channel signal comes in.

LS: Lights up when the left surround channel signal comes in.

RS: Lights up when the right surround channel signal comes in.

S: Lights up when the monaural surround channel signal

comes in.

SB: Lights up when the surround back channel signal comes in.

Note:

For RX-6040B/RX-6042S: When “DVD MULTI” is selected as the

source, “L,” “C,” “R,” “LFE,” “LS,” and “RS” light up.

Ex. No sound comes out of the

center speaker and surround

speakers though center

channel and surround

channel signals are coming

into this receiver.

How to understand the speaker and signal indicator

illumination

SB SB

Selecting different sources for picture and

sound

While watching pictures from a video source, you can listen to

sound of an audio source.

• Once you have selected a video source, pictures of the selected

source are sent to the TV until you select another video source.

Press one of the audio source selection buttons while viewing the

picture from a video component such as the VCR or DVD

player, etc.

For RX-6040B/RX-6042S

For RX-5040B/RX-5042S/RX-5045B

Note:

For RX-6040B/RX-6042S: When you see the picture through the

COMPONENT VIDEO jacks, you cannot use this function.

Adjusting the Volume

On the front panel:

To increase the volume, turn MASTER VOLUME clockwise.

To decrease the volume, turn it counterclockwise.

On the remote control:

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

CAUTION:

Always set the volume to the minimum before starting any

sources. If the volume is set at its high level, the sudden blast

of sound energy can permanently damage your hearing and/

or ruin your speakers.

Note:

The volume level can be adjusted within the range of “0” (minimum) to

“50” (maximum).

TAPE/CDR CD DVD DVD MULTI

FM/AM TV SOUND VCR

FM/AM

TAPE/CDR

SOURCE NAME

TAPE/CDR CD DVD

FM/AM TV SOUND VCR

CD FM AMTAPE/CDR

SOURCE NAME

On the front panel

Basic Operations

11-15_5040&6040[J]f.p65 03.12.18, 15:2112

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC RX-6042S Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC RX-6042S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info