Bedienungsanleitung JVC RX-6042S (Seite 23 von 44) (Englisch)

602844

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Crossover frequency—CROSSOVER

You can select the crossover frequency for the small speakers

used. The signals below the preset frequency level will be sent to

and be reproduced by the subwoofer (or by “LARGE” speakers

when “SUBWOOFER” is set to “SUBWOOFER NO”).

Select one of the crossover frequency levels according to the

size of the small speaker connected.

CROSS 80HZ: Select when the cone speaker unit built in the

speaker is about 12 cm (4

/4 inches).

CROSS 100HZ: Select when the cone speaker unit built in the

speaker is about 10 cm (3

/16 inches).

CROSS 120HZ: Select when the cone speaker unit built in the

speaker is about 8 cm (3

/16 inches).

CROSS 150HZ: Select when the cone speaker unit built in the

speaker is about 6 cm (2

/8 inches).

CROSS 200HZ: Select when the cone speaker unit built in the

speaker is about 5 cm (2 inches).

Notes:

• If you have selected “LARGE” for all activated speakers (see page

20), this function is fixed to “CROSS OFF.”

• Crossover frequency is not valid for “HEADPHONE,” “3D H PHONE”

(and “DVD MULTI” for RX-6040B/RX6042S).

Low frequency effect attenuator—LFE ATTENUATE

If the bass sound is distorted while playing back software

encoded with Dolby Digital or DTS, set the LFE level to

eliminate distortion.

• This function takes effect only when the LFE signals come in.

Select one of the following:

LFE ATT 0dB: Normally select this.

LFE ATT

−−

−10dB: Select when the bass sound is distorted.

Midnight mode—MIDNIGHT MODE

You can enjoy a powerful sound at night using Midnight Mode.

Select one of the following:

MIDNIGHT 1: Select when you want to reduce the

dynamic range a little.

MIDNIGHT 2: Select when you want to apply the

compress effect fully (useful at midnight).

MIDNIGHT OFF: Select when you want to enjoy playback

with its full dynamic range (no effect

applied).

Note:

For RX-6040B/RX-6042S: Midnight Mode is not valid for “DVD MULTI.”

Selecting the Main or Sub Channel

You can select the playback sound (channel) you want while playing

digital software recorded (or broadcast) in Dual Mono mode (see

page 26), which includes two monaural channels separately.

Dual Mono—DUAL MONO

Select the playback sounds (channel).

MONO MAIN: Select to play back the main channel (Ch 1).*

Signal indicator “L” lights up while playing

back this channel.

MONO SUB: Select to play back the sub-channel (Ch 2).*

Signal indicator “R” lights up while playing

back this channel.

MONO ALL: Select to play back both the main and sub-

channels (Ch 1/Ch 2).*

Signal indicators “L” and “R” light up while

playing back these channels.

Notes:

• The Dual Mono format is not identical with bilingual broadcasting or

the MTS (Multichannel Television Sound) format used for TV

programs. So this setting does not take effect while watching

bilingual or MTS programs.

Dual Mono signals can be heard from the following speakers—L

(left front speaker), R (right front speaker), and C (center

speaker)—with respect to the current Surround setting.

With Surround Activated

Dual Mono

Without Surround

Center speaker setting

Setting SMALL/LARGE NONE

LRLCRL R

MAIN Ch 1 Ch 1 — Ch 1 — Ch 1 Ch 1

SUB Ch 2 Ch 2 — Ch 2 — Ch 2 Ch 2

ALL Ch 1 Ch 2 — Ch 1+Ch 2 — Ch 1+Ch 2 Ch 1+Ch 2

Setting for Easy and Effective Surround

Operations

Auto Surround—AUTO SURROUND

Auto Surround works when the unit detects the incoming digital

signal. In other words, it works...

• When you select the digital source (the source with digital

input selected for it), and

• When you change the input mode from analog to digital.

Select “AUTO SURR ON” to activate Auto Surround.

AUTO SURR ON:

• When multi-channel signal is detected, an appropriate

Surround mode will be turned on.

• When Dolby Digital 2-channel with surround signals

is detected, “PLII MOVIE” will be selected.

• When Dolby Digital 2-channel without surround

signals is detected, “SURROUND OFF” will be

selected.

• When Linear PCM signal is detected, nothing will

change.

AUTO SURR OFF: Select to deactivate Auto Surround.

Continued on the next page

18-22_5040&6040[J]f.p65 03.12.19, 2:2021

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC RX-6042S Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC RX-6042S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info