Bedienungsanleitung JVC RX-8020VBK (Seite 53 von 64) (Englisch)

546765

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

One-Touch DVD Play

Simply by starting playback on the DVD player, you can enjoy the

DVD playback without setting other switches manually.

• When the DVD player is connected through the analog input jacks

on this receiver (and analog input is selected), the receiver

automatically turns on and changes the source to “DVD” or

“DVD MULTI.”

• When the DVD player is connected through the digital input

terminal on this receiver (and digital input is selected), the

receiver automatically turns on and changes the source to “DVD.”

The TV automatically turns on and changes the input mode to the

appropriate position so that you can view the playback picture.

Automatic Selection of TV’s Input Mode

• When you select “TV” as the source to play on the receiver, the

TV automatically changes the input mode to the TV tuner so that

you can watch TV.

• When you select “DVD,” “DVD MULTI,” “VCR 1,” “VCR 2,”

“VIDEO” or “DBS” as the source to play on the receiver, the TV

automatically changes the input mode to the appropriate position

(either Video Input 1 or Video Input 2) so that you can view the

playback picture.

Notes:

• When you select “TV” as the source on the receiver, you cannot

see the menu on the TV screen since the AV COMPU LINK remote

control system automatically changes the TV’s input mode to the

TV tuner.

If you do not mind stopping listening to the TV sounds, you can

then show the on-screen displays after changing the TV’s input

mode to the appropriate position (either Video Input 1 or Video

Input 2).

• This function does not work when you connect this receiver and the TV

with the AV COMPU LINK using the TV’s AV COMPU LINK EX

terminal. In this case, reconnect the TV referring to CASE 1 or CASE 2

on page 49.

Automatic Power On/Off

The TV, VCR 1 (the VCR connected to the VCR 1 jacks), and DVD

player turn on and off along with the receiver.

When you turn on the receiver;

• If the previously selected source is “VCR 1,” the TV and VCR 1

will turn on automatically.

• If the previously selected source is “DVD” or “DVD MULTI,” the

TV and DVD player will turn on automatically.

• If the previously selected source is “VIDEO,” “VCR 2,” “TV” or

“DBS,” only the TV will turn on automatically.

When you turn off the receiver, the TV, VCR 1 and the DVD player

will turn off.

Note:

If you turn off the receiver while recording on the VCR 1, the VCR 1

will not turn off, but continue recording.

1. If you have already plugged your VCR 1 (VCR

connected to the VCR 1 jacks), DVD player, TV

and this receiver into the AC outlets, unplug their

AC power cords first.

2. Connect your VCR 1, DVD player, TV and this

receiver, using the cables with the monaural mini-

plugs (not supplied).

• See “CONNECTIONS 1” on the previous page.

3. Connect the audio input/output jacks on VCR 1,

DVD player, TV and this receiver using the cables

with RCA pin plugs.

• See pages 10 to 12.

4. Connect the video input/output jacks on VCR 1,

DVD player, TV and this receiver, using the

cables with RCA pin plugs, S-video plug or

component video plugs.

• See “CONNECTIONS 2” on the previous page.

5. Plug the AC power cords of the components and

the receiver into the AC outlets.

6. When turning on the TV for the first time after

the AV COMPU LINK connection, turn the TV

volume to the minimum using the TV volume

control on the TV.

7. Turn on the connected components first, then

turn on this receiver.

• When turning on the VCR 1 (VCR connected to the VCR 1

jacks), use the remote control supplied with this receiver

(press VCR1

The AV COMPU LINK remote control system allows you to use the

five basic functions listed below.

Remote Control of the TV, DVD player, and VCR Using

This Remote Control

See page 53 for details.

• Aim the remote control directly at the remote sensor on each

target component.

One-Touch Video Play

Simply by inserting a video cassette without its safety tab into the

VCR 1 (VCR connected to the VCR 1 jacks), you can enjoy the

video playback without setting other switches manually. The

receiver automatically turns on and changes the source to “VCR 1.”

The TV automatically turns on and changes the input mode to the

appropriate position so that you can view the playback picture.

When you insert a video cassette with its safety tab, press the play

(

3) button on the VCR 1 (VCR connected to the VCR 1 jacks) or on

the remote control. So, you can get the same result.

EN49-60.RX-8020V[UJ]_f 02.5.22, 10:04 AM50

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC RX-8020VBK Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info