495432

JVC RX-ES1SL Seite 32

32
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
27
TA
NEWS/INFO
TA/INFO
NEWS
TA/NEWS/INFO
INFO
TA/NEWS
(None)
Switching to broadcast program of your
choice temporarily
Another convenient RDS service is called “Enhanced Other
Networks.”
This allows the receiver to switch temporarily to a broadcast program
of your choice (TA, NEWS, and/or INFO) from a different station
except in the following cases:
• When you are listening to non-RDS Networks—all AM (MW)
stations, some FM stations and other sources.
• When the receiver is in standby mode or in TV Direct mode.
Before you start, remember...
The Enhanced Other Networks function is only applicable to preset
FM stations.
Press TA/NEWS/INFO repeatedly until the program
type you want appears on the display.
• Each time you press the button, the display changes to show the
following:
TA: Traffic Announcement in your area.
NEWS: News.
INFO: Program the purpose of which is to impart advice in the
widest sense.
How the Enhanced Other Networks function actually works:
If the station currently tuned in starts broadcasting the
program type you have selected
The receiver continues to receive the station, but the indicator of
the received PTY code starts flashing.
‘
When the program is over, the indicator of the received PTY code
stops flashing and remains lit, but the receiver remains in
Enhanced Other Networks standby mode.
If another FM station in the same Networks starts
broadcasting the program type you have selected while you
are listening to an FM station
The receiver automatically switches to the station. The indicator of
the received PTY code starts flashing.
‘
When the program is over, the receiver goes back to the station
previously tuned in, but still remains in Enhanced Other Networks
standby mode. The indicator of the received PTY code stops
flashing and remains lit.
Tuner operations
To stop listening to the program selected by Enhanced Other
Networks
Press TA/NEWS/INFO repeatedly again so that the program type (TA/
NEWS/INFO) indicator goes off from the display. The receiver exits
from Enhanced Other Networks standby mode and goes back to the
previously selected station.
When an emergency broadcast (Alarm ! signal) is sent from an
FM station
The receiver automatically tunes in the station except in the following
cases:
• When you are listening to non-RDS Networks—all AM (MW)
stations, some FM stations and other sources.
• When the receiver is in standby mode or TV Direct mode.
While receiving an emergency broadcast, “Alarm !” appears on the
display.
The TEST signal is used for equipment test—whether it can
receive the Alarm ! signal correctly
The TEST signal makes the receiver work in the same way as the
Alarm ! signal does. If the TEST signal is received, the receiver
automatically switches to the station broadcasting the TEST signal.
While receiving the TEST signal, “TEST” appears on the display.
NOTES
• Enhanced Other Networks data sent from some stations may not
be compatible with this receiver.
• Enhanced Other Networks does not function for some FM stations
with RDS service.
• While listening to a program tuned in by the Enhanced Other
Networks function, the station does not change even if another
network station starts broadcasting a program of the same
Enhanced Other Networks data.
• While listening to a program tuned in by the Enhanced Other
Networks function, you can only use the TA/NEWS/INFO and
DISPLAY.
• The Enhanced Other Networks mode only works when receiving an
FM station with the Enhanced Other Networks code.
CAUTION:
If the stations alternate intermittently between the station tuned by the
Enhanced Other Networks function and the currently tuned station,
press TA/NEWS/INFO repeatedly to cancel the Enhanced Other
Networks function. If you do not press the button, the currently tuned
station is received finally, and the indication of the Enhanced Other
Networks data type flashing on the display disappears.
23-27.RX-ES1&XV-N55[B]f 03.2.18, 1:46 PM27
… 32 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

jvc-rx-es1sl

Suche zurücksetzen

  • ich habe anlage rx-es1 kann nicht verbinden bass mit anlage Eingereicht am 20-12-2017 12:53

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC RX-ES1SL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info