Bedienungsanleitung JVC SP-EXD1 (Seite 44 von 52) (Englisch)

56246

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

If noise comes during playback or playback is

interrupted with the wireless connection, try

either operation below:

• press CHANNEL on the transmitter to search for

another frequency. Each time you press

CHANNEL, the frequency advances one

channel up from CH 1 up to CH 13.

• press and hold CHANNEL for more than three

seconds to make sure the transmitter detects the

best frequency automatically.

If the transmitter has an influence on the

wireless systems (based on IEEE 802.11b/11g,

the cordless telephone, and the microwave

oven), try the operations below:

• to keep the distance between the transmitter and

the LAN antenna utilize the supplied extension

cord.

• press CHANNEL on the transmitter to search for

another frequency. Each time you press

CHANNEL, the frequency advances one

channel up from CH 1 up to CH 13.

• press and hold CHANNEL for more than three

seconds to make sure the transmitter detects the

best frequency automatically.

If no sound comes from the speakers, check

the following items:

• check the transmitter is detected properly as

follows: open the Control Panel on your PC,

select [Sounds and Audio Devices] = [Audio]

tab = [Sound playback] = [Default device], and

check [Default device] is set to [USB Speaker]*.

• check the playback software on your PC is

compatible with the USB device.

• select “WIRELESS” as the source.

• adjust the volume level on the system.

NOTE

* English version of Windows XP

is used for the

explanation. If your PC is running on a different

version of operation system or language, the

description may differ.

For Windows

98/98SE: open the Control Panel,

select [Multimedia], choose [AUDIO] at Playback

section, and make sure [USB Audio Device] is

selected.

If you are playing back CD from your DVD/CD-ROM

at [Multimedia] properties, select [CD Music] and

click on to the box indicating [Enable digital CD

audio for this CD-ROM device].

If the system keeps displaying “SEARCHING”

while the transmitter is connected to the PC,

check the following items:

• keep proper distance between the system and

your PC.

• no obstacles in between the transmitter and the

main unit.

If the system still displays “SEARCHING,” follow

the procedure below.

• Make sure the transmitter is connected to the

PC:

1 While pressing and holding 7, press

STANDBY/ON on the main unit.

The system enters “ID learning” mode.

The indicator behind the door starts flashing

fast.

• In 20 seconds:

2 Press and hold ID on the transmitter.

When the ID Learning is successful, the

indicator behind the door stops flashing and

lights up (“ID SYNC OK” is displayed).

* Microsoft

, Windows

98/98SE, Windows

Me,

Windows

2000 and Windows

XP are registered

trademarks of Microsoft corporation.

Behind the door

USB WIRELESS TRANSMITTER

IDCHANNEL

Using USB wireless transmission (continued)

EX-D5[B]_f.book Page 40 Wednesday, June 1, 2005 8:46 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-EXD1 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-EXD1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info