Bedienungsanleitung JVC SP-THG50W (Seite 25 von 32) (Englisch)

57311

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operation

Presetting the Radio Stations

You can preset 50 stations for FM and AM (MW).

Before tuning, make sure that you have turned down

the volume.

1. Press FUNCTION on the remote control until FM

or AM (MW) appears in the display window.

2. And then every time you press FUNCTION, FM

and AM (MW) changes alternately.

3. Press and hold TUNING.(-/+) for about two

seconds until the frequency indication starts to

change, then release.

Scanning stops when the DVD/CD Receiver tunes in a

station.

4. Press PROG./MEMO. on the remote control.

A preset number will flash in the display window.

5. Press PRESET (-/+) on the remote control to

select the preset number you want.

6. Press PROG./MEMO. on the remote control again.

The station is stored.

7. Repeat steps 3 to 6 to store other stations.

To tune in a station with a weak signal

Press TUNING.(-/+) repeatedly in step 3 to tune in the

station manually.

To clear all the stored stations

Press and hold PROG./MEMO. for about two seconds

and “ERASE ALL” is appeared in the display window

and then press PROG./MEMO. again, the stations are

cleared.



If you have accidentally entered into the "ERASE

ALL" mode and you do not wish to clear the

memory, do not press any key. After a few seconds,

"ERASE ALL" will go off by itself and change to

normal mode.

Note:

If all stations have already been entered, the FULL

message will appear in the display window for a

moment and then a preset number will flash.

To change the preset number, follow the steps 5-6 as

above.

Listening to the Radio

Preset radio stations in the DVD/CD Receiver’s

memory first (see “Presetting radio stations” on the

left).

1. Press FUNCTION until FM or AM (MW) appears in

the display window.

The last received station is tuned in.

2. Press PRESET (-/+) repeatedly on the remote

control to select the preset station you want.

Each time you press the button, the DVD/CD Receiver

tunes in one preset station at a time.

3. Adjust the volume by rotating VOLUME on the

front panel or by pressing VOLUME + or - on the

remote control repeatedly.

To turn off the radio

Press POWER to turn the DVD/CD Receiver off or

select another function mode.

To listen to non-preset radio stations



Use manual or automatic tuning in the step 2.



For manual tuning, press TUNING.(-/+) repeatedly.



For automatic tuning, press and hold TUNING.(-/+)

for about two seconds on the front panel.

To select a preset radio station directly

You can use the number buttons on the remote

control to select a preset radio station directly.

For example, to listen to the preset station 4, press 4

on the remote control. To listen to the preset station

19, press 1 and then 9 (within 3 seconds).

For your reference



If an FM program is noisy

Press FM MODE. on the front panel or on the

Remote Control to make “MONO” appear in the

display window. There will be no stereo effect, but

the reception will improve. Press the button again

to restore the stereo effect.



To improve reception

Reorient the supplied antennas.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-THG50W Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-THG50W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info