Bedienungsanleitung JVC SP-THG60W (Seite 29 von 34) (Englisch)

56406

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Operation

Sleep Timer Setting

You can set the DVD/CD Receiver to turn off

automatically at a specified time.

1. Press SLEEP to set the desired sleep time.

The SLEEP indicator and the sleep time appears in the

display window.

2. Each time you press SLEEP the setting

changes in the following order.

SLEEP 180 →150 →120→90 →80 →70 →60→50 →

40 →30 →20 →10 →OFF (No display)

Note:

You can check the remaining time before the DVD/CD

Receiver turns off.

Press SLEEP. The remaining time appears in the

display window.

Dimmer

This function will change the brightness of the display

window on the front panel during in power-on status.

Press the DIMMER repeatedly.

Muting

Press MUTING to mute your unit.

You can mute your unit in order, for example, to

answer the telephone, the “MUTING” indicator flashes

in the display window.

Note:

This muting doesn’t affect the audio output to HDMI; it

only mutes the output of speakers connected to the

unit.

Setting the disc ejection lock

You can lock the disc tray to prevent the disc form

being ejected.

When the main unit is turned off, hold down the STOP

key at the front panel for 5 seconds

If you attempt to open the disc tray by pressing

OPEN/CLOSE key, the disc tray does not open and

“LOCKED” appears in the display window.

To cancel the disc ejection lock, hold down the STOP

key at the front panel for 5 seconds again when the

main unit is turned off.

“UNLOCKED” is displayed in the display window.

Note:

Before the main unit is turned off, DVD/CD function

should be selected.

Enjoying audio form an external

source

You can enjoy audio form an external source through

your unit.

Press INPUT repeatedly to select the desired input

source. - AUX, AUX OPT, TV-AUDIO, AUDIO IN, USB

Setting the surround mode

You can select the Dolby Pro Logic II. Press

SURROUND to change surround mode repeatly.

[BYPASS] mode : Software with multichannel

surround audio signals is played according to the

way it was recorded.

[PL II MOVIE] mode: The Movie mode is for use

with stereo television shows and all programs

encoded in Dolby Surround. The result is enhanced

soundfield directionality that approaches the quality

of discrete 5.1-channel sound.

[PL II MUSIC] mode: The Music mode is for use

with any stereo music recordings.

[PL II MATRIX] mode: The Matrix mode is the same

as the Music mode except that the directional

enhancement logic is turned off. It may be used to

enhance mono signals by making them seem

“larger.” The Matrix mode may also find use in auto

systems, where the fluctuations from poor FM

stereo reception can otherwise cause disturbing

surround signals from a logic decoder. The ultimate

“cure” for poor FM stereo reception may be simply

to force the audio to mono.

Notes:

•

In some of surround modes, some speakers maybe

no sound or low sound, it depends on the mode of

surround and the source of audio, it is not defective.

•You may need resetting the surround mode, after

switch the input, sometimes even after the sound

track changed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-THG60W Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-THG60W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info