56440
14
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
10
Connections
7 To connect the video components for the source of VIDEO 1
You can get better picture quality in the order — HDMI > Component video > S-video > Composite video.
NOTE
Unify the way of TV connection and that of video component’s (for example, connect a video component through S-VIDEO jack
when TV is connected through S-VIDEO jack). Otherwise, the signal from the component is not sent to the TV.
The audio signal through the HDMI VIDEO 1 IN terminal is not reproduced on this system. The signal is reproduced on the TV
connected with HDMI MONITOR OUT terminal.
Use an HDMI cable shorter than 5 m (15 ft).
When you are playing HDCP (High-Bandwidth Digital Content Protection) content, the sound and picture may not be
transmitted to the speakers and TV for a few seconds at the beginning due to the confirmation process.
If the component video output jacks of your video components of the BNC type, use a plug adapter (not supplied) to convert the
pin plugs to BNC plugs.
When shipped from the factory, the source of “VIDEO 1” have been set for use with the AUDIO VIDEO 1 IN terminal for the
audio connection. If you connect the components with digital optical audio cord, change the audio input (VIDEO 1) setting to
“Digital.” (See page 31.)
Before connecting a digital optical cable, unplug the protective plug from DIGITAL IN VIDEO 1 terminal.
If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound
output through this system may be distorted.
Connecting the video components for the source of VIDEO 1
Center unit
To HDMI output
HDMI cord (not supplied)
DVD recorder, DVD player,
satellite tuner, VCR
or game console
To component
video output
Component video cord
(not supplied)
or
S-video cord
(not supplied)
To composite
video output
To S-video
output
Composite video cord (supplied)
Align the
5
marks.
To analog
audio output
To digital optical
audio output
RCA pin plug cord
(not supplied)
Digital optical audio cord
(not supplied)
Do not connect the power cord until all other connections have been made.
TH-L1[JC].book Page 10 Friday, March 16, 2007 10:22 AM
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC SP-THL1F wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC SP-THL1F

JVC SP-THL1F Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch - 139 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info