Bedienungsanleitung JVC SP-THL1F (Seite 34 von 40) (Englisch)

56440

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Setting preferences

7 FILE TYPE

When several types of files are recorded on a device, you

can select which files to play.

•AUDIO

Select this to play MP3/WMA/WAV files.

• STILL PICTURE

Select this to play JPEG files.

•VIDEO

Select this to play MPEG-1/MPEG-2/ASF files.

: Audio menu (AUDIO)

7 D. RANGE COMPRESSION (Dynamic range

compression)

You can enjoy low level recorded sound clearly at night even

at a low volume when listening to the sound with Dolby

Digital.

•AUTO

Select this when you want to enjoy surround sound with

its full dynamic range (no effect applied).

•ON

Select this when you want to fully apply the compression

effect (useful at midnight).

NOTE

• When you play a multichannel Dolby Digital source with the

surround mode is off, the setting of D. RANGE

COMPRESSION is set to ON automatically.

: Speaker setting menu (SPK. SETTING)

7 Level menu (LEVEL)

FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/

CENTER SPEAKER/SURROUND RIGHT SPEAKER/

SURROUND LEFT SPEAKER

While monitoring the test tone, adjust the output level of

the speakers.

You can adjust the output level within the range of -6 dB to

+6 dB.

TEST TONE*

Emits the test tone.

* The test tone comes out of all of the activated speakers in

the following sequence:

s Front left speaker s Center speaker s Front

right speaker s Surround right speaker s Surround

left speaker s (back to the beginning)

NOTE

• No test tone comes out of the subwoofer.

7 Delay menu (DELAY)

Example:

Set to “0 ms” for the furthest speaker from your position as

the basis for the delay time setting.

In this case, set the delay time of each speaker as follows;

• Delay time of front speakers: 0 ms

• Delay time of center speaker: 1 ms

• Delay time of surround speakers: 2 ms

FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/

CENTER SPEAKER/SURROUND RIGHT SPEAKER/

SURROUND LEFT SPEAKER

Adjust the distance from the listening position to the

speakers.

Within the range of 0 ms to 15 ms (by 1 ms).

7 Subwoofer menu (SUBWOOFER)

LEVEL

You can set the output level of the subwoofer within the

range of -6 dB to +6 dB.

CROSS OVER

The signals below the preset frequency level will be sent to

and be reproduced by the subwoofer.

Select one of the crossover frequency levels according to the

size of the small speaker connected.

• 120Hz: Select when the cone speaker unit built in the

speaker is about 8 cm (3-3/16 inches).

• 150Hz: Select when the cone speaker unit built in the

speaker is about 6 cm (2-3/8 inches).

• 200Hz: Select when the cone speaker unit built in the

speaker is about 5 cm (2 inches).

NOTE

• When you use a supplied subwoofer (SP-THL1W), select

“150Hz.”

Subwoofer

Front left

0 ms

Center speaker

1 ms

Front right

0 ms

Surround left

2 ms

Surround right

2 ms

1 ms increase (or decrease) in delay time corresponds to

about 30 cm (1 ft) decrease (or increase) in distance.

See page 29 for button locations.

TH-L1[JC].book Page 30 Friday, March 16, 2007 10:22 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-THL1F Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-THL1F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info