Bedienungsanleitung JVC SP-THS3 (Seite 18 von 44) (Englisch)

56717

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Basic operations

The system turns off automatically when the specified period of

time has passed.

Press SLEEP.

Each time you press the button, the shut-off time changes.

Example:

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly.

To cancel

Press SLEEP repeatedly until “SLEEP OFF” appears.

• Turning off the power also cancels the Sleep Timer.

Press S.WFR +/– to adjust the subwoofer.

Press CENTER +/– to adjust the center

speaker.

Press SURR.-L +/– to adjust the surround

left speaker.

Press SURR.-R +/– to adjust the surround

right speaker.

NOTE

• You can also make adjustments by using the setup menu shown on the

TV screen. (See page 32.)

• The adjustments take effect for all sources.

• You cannot make this adjustment when FM or AM is selected as the

source.

Press TREBLE +/–.

NOTE

• The adjustments take effect for all sources.

The system can be accommodated to your TV’s scan mode.

• To use the system in progressive mode, it is required that the

center unit is connected to the TV using a component video cord

(not supplied) in advance. (See page 9.)

7 While DVD is selected as the source and before playback

1 Press and hold SCAN MODE for

2 seconds.

The current setting appears on the display window.

2 Press Cursor 3/2 to select the desired

mode.

• RGB: Select when your TV accommodates the

interlaced RGB/composite video signal.

• Y/C COMP.: Select when your TV accommodates the

interlaced S-video signal.

• PROGRESSIVE: Select when your TV equipped with

component jacks supports the progressive

video input.

You can get better picture quality in the order —

“PROGRESSIVE” > “RGB” > “Y/C COMP.” > Composite.

3 Press ENTER while the selected mode

is shown on the display window.

When “PROGRESSIVE” is selected, the PROGRESSIVE

indicator lights on the display window.

NOTE

• Although the picture may be distorted when you press ENTER, this

is not a malfunction of the system.

• “RGB” is selected at your purchase.

Sleep Timer [SLEEP]

Adjusting the output level

of the subwoofer and

center/surround speakers

[S.WFR, CENTER,

L-SURR.-R]

Adjusting the treble

sound [TREBLE]

SLEEP 60mi n

minutes

Changing the scan mode

• There are some progressive TVs and High-Definition TVs that are

not fully compatible with this system, resulting in an unnatural

picture when playing back a DVD VIDEO in the progressive scan

mode. In such a case, change the scan mode to “RGB” or “Y/C

COMP.”.

To check the compatibility of your TV, contact your local JVC

customer service center.

• All JVC progressive TVs and High-Definition TVs are fully

compatible with this system.

See page 13 for button locations.

THS3-EN.book Page 15 Friday, May 7, 2004 5:37 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-THS3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-THS3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info