Bedienungsanleitung JVC SP-THS3 (Seite 33 von 44) (Englisch)

56717

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Advanced operations

When using the on-screen bar:

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to highlight .

3 Press ENTER.

4 Press Cursor Y/5 repeatedly to select

“A-B”.

5 Press ENTER at the beginning of the

part you want to repeat (point A).

6 Press ENTER at the end of the part you

want to repeat (point B).

A-B Repeat Playback starts.

7 Press ON SCREEN.

The on-screen bar disappears.

To cancel

Select “OFF” in step 4, then press ENTER.

NOTE

• When playing back a DVD VIDEO, A-B Repeat Playback is possible

only within the same title.

• “A-B” cannot be selected during Program and Random Playback.

You can lock the tray and prohibit the unwanted disc ejection.

On the center unit ONLY:

While the system is turned off

• The system turns on and “LOCKED” appears on the display

window.

• If you try to eject the disc, “LOCKED” appears to indicate that

the tray is locked.

To cancel

Carry out the same operation again.

• The system turns on and “UNLOCKED” appears on the display

window.

NOTE

• This function also takes effect for the sources other than DVD.

• Before you start operation;

There is a time limit when doing the following steps. If the setting is

cancelled before you finish, start from step 1 again.

1 Press SETTING.

Example:

2 Press Cursor Y/5 to select the item

you want to set.

• BAL (Balance):

You can adjust the balance between the front left and front

right speakers.

• DEC (Decode):

When you play an external source (AUX DIGITAL is

selected as a source) that was encoded with Dolby Digital or

DTS Digital Surround, the following symptoms may occur;

• No sound comes out at the beginning of playback.

• Noise comes out while searching for or skipping chapters

or tracks.

AUT (Auto)/PCM:Normally select this. The system

automatically detects the incoming signals.

DOLBY D: Select this if the symptoms above occur

when playing a disc (or software) encoded

with Dolby Digital.

DTS: Select this if the symptoms above occur

when playing a disc (or software) encoded

with DTS Digital Surround.

• A. POS (Audio Position):

Set the audio position of subwoofer so that the subwoofer

level can be automatically adjusted properly. (The smaller

the number becomes, the more the level decreases

automatically when listening in stereo.)

3 Press Cursor 3/2 to make an

adjustment or selection.

Example:

The adjustment display automatically disappears a few

seconds later with the current setting.

NOTE

• When “DOLBY D” or “DTS” is selected, if a signal encoded with

another digital format comes in, you cannot listen to the sound. (The

GDIGITAL or C indicator flashes.)

Tray lock

Press and hold

Sound and other settings

BAL : CENTER

BAL : R

See page 20 for button locations.

THS3-EN.book Page 30 Tuesday, February 24, 2004 8:35 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-THS3 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-THS3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info