Bedienungsanleitung JVC SP-UXDM8 (Seite 24 von 48) (Englisch)

56519

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

About SCMS (Serial Copy Management System)

The System uses the Serial Copy Management System

which allows only first-generation digital copies to be made

of premastered software such as regular CDs.

If you try to record from a duplicated CD-R or CD-RW into

the built-in memory or USB device, “SCMS CANNOT

COPY” appears on the display (see step 4 on page 22).

About HCMS (High-Speed Copy Management System)

This System uses the High-Speed Copy Management

System which allows you to record the tracks from the disc

in the recording speed of “REC SPEED HIGH.”

Once you recorded tracks in the recording speed of “REC

SPEED HIGH,” you cannot record the same tracks again in

the recording speed of “REC SPEED HIGH” until 74

minutes pass from the start of the recording of that track.

To check the available remaining time to record

See “To check the current clock time during play” on

page 14.

• When you want to check the available remaining time to

record onto the built-in memory:

Display “MEM REMAIN.”

• When the remaining time to record on the built-in

memory is insufficient for target tracks, “DATA FULL”

appears on the display and you cannot record them onto

the built-in memory.

• When you want to check the available remaining time to

record onto a USB device:

Display “USB REMAIN.”

• When you check the available remaining time to record

while any source other than “MEMORY” or “USB” is

selected as a source, the available remaining time to record

is calculated using the current Recording Mode.

• When you check the available remaining time to record

while “MEMORY” or “USB” is selected as a source, the

available remaining time to record is calculated using the

“SP REC” (Recording Mode).

Recording from a Disc

You can record tracks in digital recording from a CD onto

the built-in memory or USB device.

• Do not vibrate the System while recording/editing tracks.

Take care especially while

“WRITING” is shown on the

display. It may damage the recorded tracks on the System.

1 Start and stop playback of the disc.

• When you select a track (see “To select a track” on page 9)

after this step, recording starts from the selected track.

2 Select a Recording Mode.

You can get better sound quality in the order

— EP REC

sSP REC s HQ REC.

1st generation

2nd generation

HQ REC Record at a bit rate of 192 kbps.

• You can record about 160 tracks on the

built-in memory in this mode (When

assuming 4 minutes per track).

SP REC Record at a bit rate of 128 kbps.

• You can record about 250 tracks on the

built-in memory in this mode (When

assuming 4 minutes per track).

EP REC Record at a bit rate of 64 kbps.

• You can record about 500 tracks on the

built-in memory in this mode (When

assuming 4 minutes per track).

HQ REC

EP REC

SP REC

UX-DM8[U].book Page 21 Monday, June 4, 2007 8:20 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-UXDM8 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info