Bedienungsanleitung JVC SP-UXG45 (Seite 17 von 33) (Englisch)

56288

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Playing Back Other Equipment

To connect other equipment

By using an stereo mini plug cord (not supplied), you can

connect equipment with analog audio output jacks such as a

Digital Audio Player, or a TV, etc.

If the audio output on the other equipment is not stereo

mini plug type,

Use a plug adapter to convert the stereo mini plug to the

corresponding plug of the audio output.

Refer to the manuals supplied with the other equipment.

To adjust the sound input level from other

equipment

You can adjust the sound input level from the connected

equipment, if the incoming signal is too small or too large.

1 Select AUX for the source.

2 Adjust the input level.

AUX LVL 1: Ordinary input level (factory setting).

Suitable for equipment with low output level

(such as a portable audio device).

AUX LVL 2: Decreased input level.

Suitable for equipment with high output level

(such as a DVD player).

memo

• If you feel that the output level from the external

equipment is high, select AUX LVL2.

Quick Portable Link (QP Link)

If you connect other equipment such as a digital audio player

to the AUX terminal and play it back, the source

automatically changes to AUX.

The QP Link indicator is lit while QP Link is activated.

When QP Link is activated...

• If an audio input is received at AUX when the System is

turned on, the source automatically switches to AUX.

• If an audio input is received at AUX when the System is in

standby mode, the system automatically turns on and plays

the audio.

• You cannot change the source while audio input is being

received at AUX.

If you press another source button, the QP Link indicator

blinks several times.

memo

• While playback is going on the portable audio device, QP

Link may turn the System on even if the Sleep Timer turn

the System to standby or if you turn the System to standby.

In this case, deactivate QP Link or stop playback on the

device connected to the AUX jack.

• If the audio input received at AUX is small, the source may

not switch to AUX.

• The source may not switch to AUX depending on the

content of the music.

• It takes a second or two for the source to switch to AUX

after another equipment such as a digital audio player is

started and sound is output. This is due to the System

detecting the signal from the equipment.

• QP Link does not work, if the clock indication is turned off

at standby.

IMPORTANT

• Always set volume to “VOL-MIN” when connecting or

disconnecting the other equipment.

AUX

(front panel)

Stereo mini plug cord (not supplied)

Portable audio

device,

Game machine, etc.

SET/RESUME

AUX LVL 1

AUX LVL 2

2 sec.

Remote

ONLY

QP LINK

(No indication)

QP Link

Canceled

UX-G45[B].BOOK Page 13 Thursday, March 2, 2006 4:26 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-UXG45 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-UXG45

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info