Bedienungsanleitung JVC SP-UXG49 (Seite 37 von 44) (Englisch)

56625

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

• For JPEG files playback...

– It is recommended that you record a file at 640 x 480

resolution. (If a file has been recorded at a resolution of

more than 640 x 480, it will take a long time to be shown.)

– This System can play only baseline JPEG files*.

Progressive JPEG files* or lossless JPEG files* cannot

be played.

* Baseline JPEG format: Used for digital cameras,

web, etc.

Progressive JPEG format: Used for web.

Lossless JPEG format: An old type and rarely used

now.

– This System can play back JPEG files with the extension

code <.jpg> or <.jpeg> (regardless of the letter case—

upper/lower).

– This System may not play back JPEG files properly if

they are recorded from a device other than a digital

camera.

• For MPEG-1/MPEG-2 playback...

– This System can play back MPEG-1/MPEG-2 files with

the extension code <.mpg> or <.mpeg> (regardless of the

letter case—upper/lower).

– The stream format should conform to MPEG system/

program stream.

– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is

recommended for the highest resolution.

– This System also supports the resolutions of 352 x 576/

480 x 576/ 352 x 288 pixels (25 fps) and 352 x 480/ 480

x 480/ 352 x 240 pixels (30 fps).

– The file format should be MP@ML (Main Profile at

Main Level)/SP@ML (Simple profile at Main Level)/

MP@LL (Main Profile at Low Level).

– Audio streams should conform to MPEG1 Audio Layer-

2 or MPEG2 Audio Layer-2.

• For DivX playback...

– This System can play only a disc of UDF-Bridge format.

“Multi-border” is not supported.

– The System supports all versions of DivX

video

(including DivX

6).

– The System supports DivX files whose resolution is 720

x 480 pixels or less (30 fps), and 720 x 576 pixels or less

(25 fps).

– Audio stream should conform to Dolby Digital, MPEG1

Audio Layer-2 or MPEG Audio Layer-3 (MP3).

– This System can play back DivX files with the extension

code <.divx> <.div> <.avi> (regardless of the letter

case—upper/lower).

– The System does not support GMC (Global Motion

Compression).

– The file encoded in the interlaced scanning mode may

not be played back correctly.

Playing Back a Digital Audio Player:

• When QP Link fails due to a weak sound signal from the

LINE IN jack, Auto Standby may turn the System off even

if you can hear the sound from the speakers.

In such cases, adjust the volume level of the component

louder so that the System can detect the sound signal

properly.

• Changing from “LINE” to another source while QP Link

works will deactivate QP Link temporarily.

In this case, the following reactivates QP Link:

– Pressing QP LINK on the remote control twice.

– Unplugging the component from the LINE IN jack, then

plugging back it in again.

• If you press

(Standby/on) to turn the System off or if

preset Timer turns the System off while QP Link works,

the System will deactivate QP Link temporarily.

In such cases, the following reactivates QP Link:

– When the sound signal from the LINE IN jack stops or is

too weak for about 30 seconds after the System is turned

off.

– When you turn on the power again.

• QP Link may start working when you just connect the

component to the LINE IN jack or disconnect it. This is not

a malfunction.

• QP Link does not work when the display is turned off (see

page 7).

Daily Operations—Sound & Other Adjustments

(see pages 12 to 15)

Adjusting the Sound:

• This function also affects the sound through the

headphones.

Changing the Scanning Mode:

• You cannot change the scanning mode to progressive in the

following cases:

– When your TV does not support the progressive video

input.

– When you have not connected your TV to the system

using a component video cord.

Setting the Clock:

• “0:00” will flash on the display until you set the clock.

• The clock may gain or lose 1 to 2 minutes per month. If this

happens, reset the clock.

Advanced Radio Operations (see pages 16

and 17)

• If you want to know more about Radio Data System, visit

«http://www.rds.org.uk».

• If the System takes time to display the Radio Data System

information—PS, PTY, RT signals, “WAIT PS,” “WAIT

PTY,” or “WAIT RT” will appear while searching.

Unique Video Disc/File Operations (see pages 18

to 20)

Selecting the Audio Track:

• On some discs/files, you cannot change audio language

during playback.

Special Effect Playback:

• During slow-motion playback, no sound will be emitted.

• While zoomed in, the picture may look coarse.

UX-G48[B].book Page 34 Friday, June 22, 2007 11:28 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-UXG49 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-UXG49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info