Bedienungsanleitung JVC SP-UXG70 (Seite 38 von 47) (Englisch)

56306

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Additional Information

Learning More about This System

Connections

(see pages 3 to 5)

• Make sure the antenna conductors do not touch any other

terminals, connecting cords or the power cord. Also, keep

the antennas away from metallic parts of the System,

connecting cords, and the AC power cord. This could cause

poor reception.

• Use only speakers with the same speaker impedance as

indicated by the speaker terminals on the rear of the System.

• The speakers are magnetically shielded to avoid color

distortions on TVs. However, if not installed properly, it

may cause color distortions. So, pay attention to the

following when installing the speakers.

– When placing the speakers near a TV set, turn off the

TV’s main power switch or unplug it before installing the

speakers.

Then wait at least 30 minutes before turning on the TV’s

main power switch again.

– Some TVs may still be affected even though you have

followed the above instructions. If this happens, move

the speakers away from the TV.

• When a portable audio device is connected to the LINE IN

jack, sound will come out of the speakers and headphones.

However, no sound will come out of the LINE OUT jack.

Daily Operations—Playback

(see pages 7 to 11)

Listening to the Radio:

• If you store a new station into an occupied preset number,

the previously stored station in that number will be erased.

• When you unplug the AC power cord or if a power failure

occurs, the preset stations will be erased in a few days. If

this happens, preset the stations again.

Listening to the TV Sound:

• When you use this function, connect the System and TV

with the Scart cable.

Playing Back a Disc:

• On some DVD, SVCD, or VCD discs, the actual operations

may be different from what is explained in this manual, due

to the programming and disc structure; such differences are

not a malfunction of this System.

• When discs* in more than one tray are loaded on the disc

trays, they are played in sequence as follows. (When DVD

Video, DVD Audio or SVCD/VCD with PBC is loaded in

the System, playback of the disc next to these discs will not

start.):

Ex.: When DISC 2 is selected:

DISC 2]

DISC 3]

DISC 4]

DISC 5]

DISC 1]

(then stops)

* When no disc is loaded on the disc tray, that disc number

is skipped.

• You can exchange discs while playing or selecting another

disc.

• Some DVD Audio discs prohibit downmix. When you

playback such a disc, “LR ONLY” appears on the display

and the System plays back the left front and right front

signals.

• When playing back a DVD Audio disc recorded in MLP

(Meridian Lossless Packing; a lossless audio compression

system that can completely recreate the PCM signal), the

signals are recognized as the linear PCM signals, however,

no indicator lights up on the display.

• This System can recognize up to 4 000 tracks in a disc.

Also, the System can recognize up to 150 tracks per group

and up to 99 groups in a disc.

– If there are any unplayable files in a folder, those files are

also counted in the total file number.

– Playable files which do not belong to any groups are

handled as Group 1.

• For DVD-VR playback...

– This System can play only a disc of UDF-Bridge format.

– For details about DVD-VR format and playlist, refer to

the manual of the recording equipment.

– You cannot use reverse slow motion, Program Play, or

Random Play.

• For MP3/WMA playback...

– MP3/WMA discs require a longer readout time than

regular CDs. (It depends on the complexity of the group/

file configuration.)

– Some MP3/WMA files cannot be played back and will

be skipped. This results from their recording processes

and conditions.

– This System can play only a disc of ISO 9660 Level 1 or

Level 2.

– This System can playback MP3/WMA files with the

extension code <.mp3> or <.wma> (regardless of the

letter case—upper/lower).

– It is recommended that you make each MP3/WMA file at

a sampling rate of 44.1 kHz and at a bit rate of 128 kbps.

This System cannot playback files made at a bit rate of

less than 64 kbps.

UX-G70[B].book Page 34 Monday, April 17, 2006 1:41 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SP-UXG70 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC SP-UXG70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info