Bedienungsanleitung JVC SR-L910E (Seite 19 von 28) (Englisch)

45656

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

VTR MODE 1

(SHARPNESS) NORMAL

(VIDEO MODE) AUTO

(AUTO REC) OFF

(REC CHECK) AUTO

(TAPE END MODE) REPEAT

(INDEX SEARCH) OFF

(INDEX AL/SKIP) ALARM

(TAPE END BUZZER) OFF

(WARNING BUZZER) OFF

PRESS (SHIFT, SET)

PRESS (MENU) TO END

7-6 Repeat Recording

When the tape reaches the end during recording, it is automatically rewound and recording starts again from the beginning.

5 To execute repeat recording, set <TAPE END MODE>

on the VTR mode 1 setting screen to REPEAT.

Setting the function menu switch <TAPE END MODE>

on the alarm/sensor recording mode setting screen

• When the tape ends during recording in the case when

alarm or sensor recording is executed even once, the

tape stops or rewinds and stops at the beginning if this

menu switch set to

“STOP” or “REW”,.

If this menu switch is set to "EJECT", the tape is

ejected.

To continue repeat recording even when alarm/

sensor recording is executed, set this menu

switch to “REPEAT” .

* When repeat recording is performed, the previously-

recorded alarm recording is erased.

Auto Recording Check function

This function automatically checks recording quality at

the beginning of the tape during repeat recording.

• To activate the Auto Recording Check function, set the

<REC CHECK> function menu switch in the VTR mode 1

setting screen to AUTO.

Operation of the Auto Recording Check function

• The recorded section at the beginning of the tape is

automatically played back in the Repeat Record mode

and the FM level recorded on the tape is checked. If

the level is satisfactory, recording continues.

• If recording quality is deemed inferior, the heads are

cleaned automatically. After several seconds, recording

is checked again.

If recording quality is still unsatisfactory after two

consecutive checks, the error indicator E-09 is shown

in the display and recording continues.

Function menu switch <REC CHECK> set to AUTO

Normal

Defective

Recording

Repeat recording

7 RECORDING

Defective

VTR mode 1 setting screen

Beginning of

the tape

Auto head

cleaning

Auto recording

for several

seconds

Recording

check

Recording

check

Auto head

cleaning

Error indicator E-09 display

Display

Normal

Set to

REPEAT

Auto recording

check function

Tape end mode

7-7 Series Recording

The series recording function facilitates recording over much longer periods using several connected SR-L910E/EKs.

As soon as the tape ends in one VCR, the next VCR in the series starts recording.

7 RECORDING

5 Connect the first VCR

’s [SERIES/CLOCK OUT] terminal

to the second VCR

’s [SERIES/CLOCK IN] terminal.

Connect the second VCR

’s [SERIES/CLOCK OUT]

terminal to the third VCR

’s [SERIES/CLOCK IN]

terminal. Repeat for all connected VCRs. Connect the

VCR’s [COM] terminals as well.

5 Connect a video camera and/or other source equipment

to the first VCR

’s video and audio input connectors.

Connect the first VCR

’s video and audio output

connectors to the second VCR

’s video and audio input

connectors. Connect the second VCR

’s video and audio

output connectors to the third VCR

’s video and audio

input connectors. Repeat for all connected VCRs.

Connect the last VCR

’s video and audio output

connectors to the monitor

’s video and audio input

connectors.

Connections

First VCR Second VCR Third VCR

Rear panel

COM

SERIES/CLOCK

IN OUT

COM

SERIES/CLOCK

IN OUT

COM

SERIES/CLOCK

IN OUT

Operations

Set the <TERMINAL SEL 1> function menu switch on

the VTR mode 2 setting screen to

“SERIES” (series

recording) for all connected VCRs.

TERMINAL

SEL 1

REC

REMAIN

Set to

SERIES

VTR mode-2

setting screen

VTR MODE 2

(SUMMER TIME) OFF

(TERMINAL SEL 1) SERIES

(TERMINAL SEL 2) WARN

(REC REMAIN)) OFF

(NOISELESS PLAY) OFF

(CAMERA SW) OFF

(CAM SW WIDTH) 5msec

PRESS (SHIFT, SET)

PRESS (MENU) TO END

• Output a series recording signal from the [SERIES/

CLOCK OUT] terminal to start recording. Select the

timing with the <REC REMAIN> function menu switch.

• When set to “OFF”, the series recording signal is

output when the tape ends.

• When set to “180S”, the series recording signal is

output about 3 minutes before the tape ends.

• When set to “360S”, the series recording signal is

output about 6 minutes before the tape ends.

To end function setting, press the MENU button to close

the menu display and restore the time/date display.

Load cassettes with safety tab in place in all connected

VCRs.

Engage the Record mode on the first VCR.

Turn on all connected VCRs and put them in the

Standby mode. This allows you to check picture and

sound on the monitor.

When the recording is complete on the first VCR, the

second VCR automatically starts recording. This is

repeated for all connected VCRs.

Rear

panel

Video input signal

First VCR

Second VCR

Last VCR

Video output

Audio output

Monitor TV

Audio input signal

OUT

Note

• If a cassette has not been loaded in any VCR in the series, series recording will stop when that VCR is reached.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SR-L910E Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info